What can we do for you?

[AllMoparParts.com]

Hi Benny, im looking for a part number & price for a Ram TRX lighting, its the 3 red leds above the license plate below the tailgate, the name of it escapes right now. thanks for the help.

Hi,
Here is a link and photo of it
https://parts.allmoparparts.com/oem-parts/mopar-tailgate-lamp-bar-68362184ab

Please let me know if you have any questions.
Thanks,
-Benny

Sponsored

 

[AllMoparParts.com]

Looking for the part numbers for the door harnesses to use with export mirrors with heat, blind spot, and signal ... Thanks!

They are
68325456AG
68325458AG

Please let me know if you have any questions.
Thanks,
-Benny

 

[AllMoparParts.com]

Want the bed 120v inverter plug plus the harness that goes to it....any help appreciated very much

Here you go

https://parts.allmoparparts.com/oem...iator-115v-bed-power-outlet-68312754ac?c=az0x
https://parts.allmoparparts.com/oem-parts/mopar-jumper-wiring-68398209ab

Please let me know if you have any questions.
Thanks,
-Benny

 

[Joe Gladiator]

Hi,
Here is a link and photo of it
https://parts.allmoparparts.com/oem-parts/mopar-tailgate-lamp-bar-68362184ab

Please let me know if you have any questions.
Thanks,
-Benny

Very cool thanks Benny.

 

[ecidiego]

Benny,

I am interested in the Mopar Sunrider, 82216370AA. Can you please send me a quote to 28562?

FYI, AB has superceded AA. Not sure of differences.

 

[ShadowsPapa]

FYI, AB has superceded AA. Not sure of differences.

B has replaced A in the number.
Ok, just messing with ya. I know you are smarter than that for sure.

 

[ShadowsPapa]

Benny - if this is too much work or too much of a hassle, that's fine - I was planning on removing all of the fasteners, every one of them, from my copy-cat MOPAR steel bumper. Some have begun to corrode, and some the black zinc is wearing through already. I can clean and prep and plate them again, but when I look at my to-do list, I decided to look another direction -
Is it possible to buy a package of every screw, nut and washers that hold that bumper together?
Not concerned about the attachment to the truck as that's done by the original MOPAR bolts in the MOPAR hooks up front.
I'm talking about the screws nuts and washers that hold the end wings on, those that hold the front of the bumper to the back, and that hold the front and rear halves of the end "wings" together. There's a lot of screws and if I do the plating myself, I'm looking at too much time when I can get paid more than I'd spend on these if I plate hardware for someone else. Not sure it's worth my time if I can make $100 plating hardware for a restoration and buy all new for mine for half that instead of plating these.

I guess I'll put it this way - whatever comes with the steel Rubicon front bumper if a person ordered a whole front bumper - screws, nuts, washers, and clips.
There are 5 bolts that hold the front and rear halves of the end wings together, 3 that hold the plastic bezel inside the end wings (and the 3 clips) and 6 +2 that hold the end wings onto the main bumper, then however many hold the front of the bumper body itself onto the back half.

If that's just too much effort, let me know that, too..........
Since this bumper will come off this truck before I turn it over to the dealer, I'm going to "rebuild it" with either replated or new hardware before it goes onto the new truck.

 

[AllMoparParts.com]

Benny - if this is too much work or too much of a hassle, that's fine - I was planning on removing all of the fasteners, every one of them, from my copy-cat MOPAR steel bumper. Some have begun to corrode, and some the black zinc is wearing through already. I can clean and prep and plate them again, but when I look at my to-do list, I decided to look another direction -
Is it possible to buy a package of every screw, nut and washers that hold that bumper together?
Not concerned about the attachment to the truck as that's done by the original MOPAR bolts in the MOPAR hooks up front.
I'm talking about the screws nuts and washers that hold the end wings on, those that hold the front of the bumper to the back, and that hold the front and rear halves of the end "wings" together. There's a lot of screws and if I do the plating myself, I'm looking at too much time when I can get paid more than I'd spend on these if I plate hardware for someone else. Not sure it's worth my time if I can make $100 plating hardware for a restoration and buy all new for mine for half that instead of plating these.

I guess I'll put it this way - whatever comes with the steel Rubicon front bumper if a person ordered a whole front bumper - screws, nuts, washers, and clips.
There are 5 bolts that hold the front and rear halves of the end wings together, 3 that hold the plastic bezel inside the end wings (and the 3 clips) and 6 +2 that hold the end wings onto the main bumper, then however many hold the front of the bumper body itself onto the back half.

If that's just too much effort, let me know that, too..........
Since this bumper will come off this truck before I turn it over to the dealer, I'm going to "rebuild it" with either replated or new hardware before it goes onto the new truck.

Hi Bill,
Not all of the hardware is clearly designated but most of what your looking for is. I have attached a PDF that lists the hardware part numbers and will send you a code you can use. There is no kit or multi piece discount, All hardware is sold individually.

Thank you.
- Benny

 

[AllMoparParts.com]

Evening Benny @AllMoparParts.com

2021 Mojave
Looking for front shock upper bolts, should be the M14.
thanks!

According to mopar its the same part # as the lower but honestly the guy did not seem too confident

Part # 6512810AA M14 x 1.5 x 78mm long

Let me know what you think of this info

- Benny

 

[Free2roam]

Rear back up camera and required harness for mounting. Not necessarily going back on a tailgate. This will be part of my camper build. Thanks

 

[AllMoparParts.com]

Rear back up camera and required harness for mounting. Not necessarily going back on a tailgate. This will be part of my camper build. Thanks

The rear cameras are different if you have a front off road camera so I need to know this and the color as well.

- Benny

 

[Free2roam]

The rear cameras are different if you have a front off road camera so I need to know this and the color as well.

- Benny

No front camera. Sting grey.

 

[AllMoparParts.com]

No front camera. Sting grey.

Thanks, Below are links to both

https://parts.allmoparparts.com/oem-parts/mopar-with-bezel-camera-assembly-6ly71pdnad
https://parts.allmoparparts.com/oem-parts/mopar-tailgate-wiring-68397617ab

Please let me know if you have any questions.
Thanks,
-Benny

 

[calipoontappa]

Can I get a parts list for a complete install the front the cab to bed outlet please?
Can you also tell me what you have in stock?

 

[AllMoparParts.com]

Can I get a parts list for a complete install the front the cab to bed outlet please?
Can you also tell me what you have in stock?

I will need to research this when I have more time. I recall there being an issue but in the end the last customer we worked with was able to get it to work. We may need to check your body harness.

- Benny

Sponsored