What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[TRI-JAB]

These?

https://ruggedoutlander.com/products/front-runner-pickup-roll-top-top-mount-leg-tall-pair

Would appreciate a little more on the hardware bits.

Yessir, those are the legs I have on mine. I used the TALL so the tonneau will roll up to the back. Keep in mind, they sell these in pairs. You obviously need two pairs.

I drilled out the holes where the two bolts (per leg as shown above) mount through. I bought 3/8" bolts with washers and lock washers. The uni-strut nuts fit perfectly in the channel on the underside of the Rhino Rack. You can buy the nuts at Lowes:

https://www.lowes.com/pd/Adamax/5002818485

You can see in these two pics the nut in the channel and the bolts threaded into the nuts.

I hope this helps.

Sponsored

 

[XraytecH]

Yessir, those are the legs I have on mine. I used the TALL so the tonneau will roll up to the back. Keep in mind, they sell these in pairs. You obviously need two pairs.

I drilled out the holes where the two bolts (per leg as shown above) mount through. I bought 3/8" bolts with washers and lock washers. The uni-strut nuts fit perfectly in the channel on the underside of the Rhino Rack. You can buy the nuts at Lowes:

https://www.lowes.com/pd/Adamax/5002818485

You can see in these two pics the nut in the channel and the bolts threaded into the nuts.

I hope this helps.

Noticed there is a third crossmember on the underside of the Rhino Rack. Can I add a third pair of legs?

 

[arskemp]

Finished ceramic coating my Mojave today. Spent yesterday cleaning and doing paint correction, and today doing the application. Definitely more work than I had initially estimated but I'm glad it's done.

 

[actaylor]

Two minor mods...installed a 67 Designs rail w/ phone holder and Rugged Ridge door entry protectors.

 

[TRI-JAB]

Noticed there is a third crossmember on the underside of the Rhino Rack. Can I add a third pair of legs?

All the channel is the same size, so yes. I see no reason that would not work.

 

[KoBear]

I took the doors off and put $4 scooter mirrors on today.

Really impressed by the $4 mirrors. Rock solid at 50 mph.

https://www.autozone.com/miscellane...-scooter-mirror/1114168_0_0?searchText=970830

 

[DailyMoparGuy]

Not enough…I need more jeep parts

 

[Roly0037]

Just finished detailing Mojavi .

Abe, Looks Great. Who makes that front bumper.

 

[Delhux]

Got my front camera install done

Got a link to any instructions on how it is wired?

Also, what’s the gizmo above the top-right corner of your license plate?

 

[USMC_1Wire6337]

Got a link to any instructions on how it is wired?

Also, what’s the gizmo above the top-right corner of your license plate?

winch clutch handle?

 

[Lynn_F]

I finally installed my Apex Autolynx - haven't had a chance to use them yet but will post some pics when I do. Also upgraded the roll bar speakers with the Dart Kicker 3.5's and Kicker 47KSC404's a while back along with the Terra Acoustic dash replacements.

 

[abe57]

Abe, Looks Great. Who makes that front bumper.

Spartacus Full-Width Front Bumper w/ Winch Plate
https://ruggedridge.com/p/rugged-ridge-spartacus-front-bumper/v/jeep/gladiator/2021/ I like it a lot very easy install except for the tiny screws for the fog lights.. that took some time .

 

[Glad Jeeper]

Last Friday I had the bed spray, color matched RhinoLiner.
Today after work I installed this in preparation of a road trip next week.

Also added a "Full" size air mattress with built in pump. Just have to remember an extension cord so I can use the 110 outlet in the cab. Fit is OK, maybe we'll get a custom fit air mattress later. Trying cheapish ($210 total) for now, to see if we like this setup.

I have the same set up. I use the Original Airbedz mattress with the tail gate extension. Very comfortable.

 

[Roly0037]

Spartacus Full-Width Front Bumper w/ Winch Plate
https://ruggedridge.com/p/rugged-ridge-spartacus-front-bumper/v/jeep/gladiator/2021/ I like it a lot very easy install except for the tiny screws for the fog lights.. that took some time .

Thanks Abe, looks great, i might go with the same set up.

 

[abe57]

Thanks Abe, looks great, i might go with the same set up.

Better front pics

Sponsored