What plug would plug in to this?

[Phred]

I actually picked that up yesterday. But 68406685AB,

going to try and install it tomorrow and see if I can get it working. In talks with JSCAN to see what is needed to make it work.

Maybe its self recognizing once you add the rear fogs??? I.e. The logic is there but not active until the rear fogs are connected?

Sponsored

 

[Phred]

Do you have the switch group option? Worse case you could use the connectors from the harness and wire to a separate switch??

 

[J33p3r_b3ast]

has anybody figured out if this same plug is used anywhere else on a JK, JL, JT? Hoping I can source one from the junkyard...... (yeah i know not many JTs in the junkyard....)

Thanks for posting this. Is there a part number for the “female” complement to this connector, coming from the lights? Looking at this for LED license plate lights in order to plug them into factory harness as opposed to splicing to harness.

 

[Mightytalldude]

Thanks for posting this. Is there a part number for the “female” complement to this connector, coming from the lights? Looking at this for LED license plate lights in order to plug them into factory harness as opposed to splicing to harness.

I haven't seen the Euro spec harness available in the US yet. The part # is a page or two back I believe. The licence plate harness is the right plug with a 90° turn. Much cheaper than buying the plugs separately, just have to modify the length. However, you'll have to run a wire somewhere as the wires for it aren't in the US wiring harness. Same for wiring up mirror turn markers, or the Euro spec taillights with the amber light.

Sponsored