Sponsored

Evo enforcer lift 2.5” and wobble

jbarry803

New Member
First Name
John
Joined
Oct 24, 2023
Threads
1
Messages
2
Reaction score
0
Location
Vacaville,CA
Vehicle(s)
JT
I have installed the 2.5 hd enforcer lift, with front lower and rear upper control arms, on my Mojave jt. I have also replaced track bars with lift. I am experiencing a wobble at highway speeds on rough roads. It goes away after slowing. I have new adjustable track bars and installed evo’s shock extensions to keep fancy shocks. I have had it aligned and checked all the bolts. Tires are stock and worn but I have rotated them post lift.
Any suggestions on potential fixes?
Sponsored

 

Free2roam

Well-Known Member
First Name
Robert
Joined
Mar 1, 2021
Threads
30
Messages
5,479
Reaction score
11,669
Location
89521
Vehicle(s)
Gladiator
Occupation
Fabricator by trade/ Maintenance Mechanic
I found this extremely helpful. I had a 2.5 Clayton Overland kit installed after about 2k miles I was experiencing a slight wobble. Especially when I hit a bump. This guy explained it perfectly IMO. I re-tightened all of my bolts and literally just used a tape measure and eyeball down the side of the truck. Eventually put a string line across rear tires to front tires. I think I started out based on my measurements at about 1.25 turns. Based on what he was doing to his to get where he needed to be. I then drove it 1/2 hour across bumps and uneven roads at speed. Came back measured again and then readjusted to I believe I took 3/4 back out. Been pretty happy so far. Here's the link
 
OP
OP

jbarry803

New Member
First Name
John
Joined
Oct 24, 2023
Threads
1
Messages
2
Reaction score
0
Location
Vacaville,CA
Vehicle(s)
JT
I found this extremely helpful. I had a 2.5 Clayton Overland kit installed after about 2k miles I was experiencing a slight wobble. Especially when I hit a bump. This guy explained it perfectly IMO. I re-tightened all of my bolts and literally just used a tape measure and eyeball down the side of the truck. Eventually put a string line across rear tires to front tires. I think I started out based on my measurements at about 1.25 turns. Based on what he was doing to his to get where he needed to be. I then drove it 1/2 hour across bumps and uneven roads at speed. Came back measured again and then readjusted to I believe I took 3/4 back out. Been pretty happy so far. Here's the link
thanks. I may have to get it realigned. Everything is tight. I dont Feel confident to eye ball it. Props to you!
Sponsored

 
 







Top