What can we do for you?

[dajudge]

6 of these please:
Mopar 06510157AA

Sponsored

 

[RidingDonkeys]

Looking for the rubber seals for the MOPAR tri-fold cover. Any chance there's a kit, or do I need to order each part individually?

 

[AllMoparParts.com]

Sorry guys I was out for some time. I'm working on your inquiries now

- Benny

 

[AllMoparParts.com]

To @AllMoparParts.com or anyone else who might know.

Help identifying wiring harness part number.

I have a short that is causing the left reverse lamp to stay on whenever the vehicle is in Run. At this time I would like to identify the Mopar part number for the wiring harness. I am not sure, but I think it might be Jumper Wiring 68398212AB.

https://parts.allmoparparts.com/oem-parts/mopar-jumper-wiring-68398212ab

Can you confirm if this is correct? The following seven pics can hopefully help in identifying it. Thanks in advance for any help you can offer.

Pic 1 – This looking up from underneath with the spare tire removed. Red arrow shows location of short. Pushing here in the direction of the arrow causes the reverse lamp to go off.

Pic 2 – Closeup view of short location.

Pic 3 – Wiring traveling toward the rear from short location.

Pic 4 – Continuation of wiring toward rear. Blue box shows connector that splits off.

Pic 5 – Wiring termination at rear. Green box is trailer wiring connector that may be coming from the connector in the blue box. Either that or it is the other wire.

Pic 6 – This is the wiring going toward the front of the JT. Red arrow shows direction of travel from Pic 1. Blue box shows the main harness continuing forward. First green circle is a ground cable coming off the harness. Second green circle shows wire terminating to a connector.

Pic 7 – The connector in the second circle from Pic 6. The box it connects to terminates and no wire appears to continue from there.

This looks like the chassis harness but I will need your VIN to research further

- Benny

 

[AllMoparParts.com]

@AllMoparParts.com

Hi Benny,

I need a TPMS sensor for a 10/21 build 2021 Rubicon. Replacing the steel wheel with a Rubicon wheel so I can do a 5 tire rotation.

Could use a code too. Thanks.

Hi Bob,
I will send you a code you can use on these
https://www.allmoparparts.com/sku/68339096ab.html

- Benny

 

[AllMoparParts.com]

@AllMoparParts.com
Hello Benny,
Looking at ordering a pair of these, is there a shipping code? Thanks.
Genuine Mopar Front Lower Control Arm - 68322798AA | All Mopar Parts

Hi Carmine,
PM sent

- Benny

 

[AllMoparParts.com]

Hi Benny,

Can you source these extended bezels and the crush cans separately?

82216474AA

Can you clarify what style bumper these are off of? They do not appear to be from the 3 piece steel Rubicon version.

- Benny

 

[AllMoparParts.com]

6 of these please:
Mopar 06510157AA

Hi,
We can have these shipped in a few days
https://parts.allmoparparts.com/oem-parts/mopar-hex-flange-head-screw-6510157aa

I will send you a code you can use,
- Benny

 

[AllMoparParts.com]

Looking for the rubber seals for the MOPAR tri-fold cover. Any chance there's a kit, or do I need to order each part individually?

Hi Jeff,
I do not believe these are serviceable from Mopar but I am checking with my contact.

Thanks,
- Benny

 

[RubiDukkie]

This looks like the chassis harness but I will need your VIN to research further

- Benny

Hey Benny, I believe you are right. I got the Jeep up on ramps this past weekend so that I could better inspect and came to the same conclusion. Anyway, I was able to peel back the harness cloth wrap and found it was the +12v wire and the reverse lamp wire the insulation got nicked. Being right next to each other they touched causing the left reverse lamp to come on. I put some electrical tape around them to temporarily mitigate. If the weather is good this weekend I will cover the nicked insulation with liquid electrical tape and then rewrap the harness in that spot with cloth harness tape. No need for ordering a new harness. Thanks for responding though.

 

[ShadowsPapa]

Does MOPAR make/supply splash guards (mud flaps, whatever your favorite word) for front AND rear of Mojave?

 

[AllMoparParts.com]

Does MOPAR make/supply splash guards (mud flaps, whatever your favorite word) for front AND rear of Mojave?

Hi Bill,
I only see this Rear set available at this time
https://www.allmoparparts.com/sku/82216377ab.html

Please let me know if you have any other questions.
Thanks,
-Benny

 

[arom]

Hey Benny, looking to do the paddle shifter retro. Was wondering if parts are available and price:

68487852AB RH paddle
68487853AB LH paddle
68531086AA Wiring
68505662AA RH cover
68505663AA LH cover

Thank you!!

 

[AllMoparParts.com]

Looking for the rubber seals for the MOPAR tri-fold cover. Any chance there's a kit, or do I need to order each part individually?

Hi,
I have confirmed Mopar does not offer these but you should be able to obtain parts directly from the vendor at 833-204-2606

Thank you,
- Benny

 

[Jobofly]

HI I am looking for all of the bolts needed for the hardware on a soft top JL. I have all of the plastic pieces, just need the screws for them.

Sponsored