Overland leveling kit - how many inches of level in the front?

[Hwyhog]

Curious about how many inches of level in the front I need for the overland? Seems to be different than the rubicon & mohave. Planning on 35s.

Sponsored

 

[j.o.y.ride]

Masure height at front frame and height at rear frame. Leveling that out will flatten the frame.

If you add a lot of gear in the back or people then measure in that loaded capacity or you will be Carolina squatting when loaded. Generally keep a little rake.

A single driver with no gear won't be the same as a family of 4 with a bunch of stuff in the bed.

 

[Hwyhog]

Sad thing is, don’t have an overland to measure. My ordered overland is on the train en route, & the local dealership doesn’t have one. I’m trying to get the right kit ordered, just don’t know the height difference.

 

[wvyankee2]

Mine after Mopar lift install had 1 3/4" . After installing my 260# topper and BedSlide it is now 1 1/4".

 

[Hwyhog]

Mine after Mopar lift install had 1 3/4" . After installing my 260# topper and BedSlide it is now 1 1/4".

That a full lift or just level?

 

[Abnmarine]

I have 1 1/2” spacers in my Overland to achieve level. I also have the Mopar steel stubby bumper.

 

[Moe_Fugga]

Curious about how many inches of level in the front I need for the overland? Seems to be different than the rubicon & mohave. Planning on 35s.

1.5 kit will make it right.

 

[jfhull71]

Curious about how many inches of level in the front I need for the overland? Seems to be different than the rubicon & mohave. Planning on 35s.

1.5 front 3/4 rear is the look I'm going to go with, prevents squat look loaded and some rake otherwise, but honestly there's enough people on here running 35's stock height, all depends on the look you want, and climbing in height you want to live with daily

 

[wvyankee2]

That a full lift or just level?

Full 2" Mopar lift.

Sponsored