Lift kit for Sport w/ BFG Ko2 325/17/70 ?

[Michaeljfoxtail]

Im sure this thread is out there somewhere but I haven’t found it yet. I own a stock 2020 sport, I recently installed bfg Ko2 325/17/70, there is minimal rubbing when fully articulated... I’m looking at installing a lift kit to help with my off-roading capabilities(no crazy rock crawling as this is my daily driver) im leaning toward the mopar 2” lift while adding spydertech spacers... maximum clearance for my parking garage at work is 6’6”.

Sponsored

 

[Boostnu]

This is my sport with the mopar lift and 3/4in spacer in the front. I’m running 315/70/17 tires. The mopar lift on a sport is closer to 3inch. Another good option would be a rubicon take off suspension with a 3/4 to 1in spacer in the front.

 

[Mac]

Im sure this thread is out there somewhere but I haven’t found it yet. I own a stock 2020 sport, I recently installed bfg Ko2 325/17/70, there is minimal rubbing when fully articulated... I’m looking at installing a lift kit to help with my off-roading capabilities(no crazy rock crawling as this is my daily driver) im leaning toward the mopar 2” lift while adding spydertech spacers... maximum clearance for my parking garage at work is 6’6”.

What wheels did you install them on?

 

[DocMike]

I went with the Rubicon and got one inch all around. It was $200. I run a 33 and have a slight bit of rubbing when disconnected at the swaybar My rims are also -18 offset. Going to run the terraflex 1.5 spacer hopefully tomorrow.

 

[Michaeljfoxtail]

What wheels did you install them on?

What wheels did you install them on?

Stock wheels

 

[JT LIFE]

Sport with stock wheels 315/70/17 Patagonia mts 2" Mopar lift 1.5 inch wheel spacers no rubbing at full articulation....

Sponsored