2021 Mojave pillar roof light bar

[Subman666]

Since the light bar pillars that fit the Rubicon do not fit the Mojave, I'm asking if anyone has found one yet. I have a 2021 Mojave and still looking for pillar mounting bars that will fit the cowling for a light bar.
I can weld one up but the effort required is excessive if someone already has designed and selling them.

Sponsored

 

[CMac]

Since the light bar pillars that fit the Rubicon do not fit the Mojave, I'm asking if anyone has found one yet. I have a 2021 Mojave and still looking for pillar mounting bars that will fit the cowling for a light bar.
I can weld one up but the effort required is excessive if someone already has designed and selling them.

Sniff around on the forum…there are a lot of threads specific to Mojave COWLING light mounts, but for individual (cube-style) lights…they do exist.

 

[Subman666]

Sniff around on the forum…there are a lot of threads specific to Mojave COWLING light mounts, but for individual (cube-style) lights…they do exist.

I may not have described what I am seeking. Not looking for a cowling level lights rather pillars that connect to cowl and extend up to the top of windshield so a light bar may be attached.

 

[Ridgeline]

https://www.quadratec.com/p/go-rhino/windshield-light-mount-wrangler-jl-gladiator-jt

 

[Subman666]

https://www.quadratec.com/p/go-rhino/windshield-light-mount-wrangler-jl-gladiator-jt

Sorry, the mount shown in pic above does not fit the Mojave. The Mojaves cowl is taller than that of all other gladiators.

 

[Ridgeline]

Sorry, the mount shown in pic above does not fit the Mojave. The Mojaves cowl is taller than that of all other gladiators.

 

[abe57]

Sorry, the mount shown in pic above does not fit the Mojave. The Mojaves cowl is taller than that of all other gladiators.

Yes it will customer that bought it said : "Just a note for anyone with a jeep gladiator Mojave. The Mojave cowl is an inch higher than the other gladiator models but this will fit. The top edge of the mount has about a quarter inch of clearance at the cowl. Had to put a small bend in the antenna to allow enough room for the spacer to fit behind bracket. Fit and finish is very nice, installation took about an hour. Recommend having someone help with installing the light in the bracket. Look is very nice and havent noticed any wind noise from the DV8 light bar. Installed on 2020 Jeep Gladiator Mojave. "

 

[Jaxmax]

Well, actually on their website, in the reviews people have put them on Mojaves and the 392 Wrangler which has the same hood as Mojave, there are pictures, has 1/4" clearence on top of cowling, check it out, might be cheaper to modify it if you are not comfortable with the clearence then starting from scratch.....Jack

wow lot of quick replys I need to type faster!

 

[svc707]

Trimming needed but you can make them fit if you have a grinder and cut off wheel

 

[svc707]

This one claims it fits ALL
https://www.extremeterrain.com/jeep...ets-upper-lower-light-mounts-wlb-0050-g2.html

I can tell by the looks of the arc and mount to the hinge bolt. That one won't fit mojave either and will need to be cut/trimmed too

 

[91Bmech]

I have researched and heard from other mojave owners that GoRhino a pillar mounts fit perfectly. Thats what im looking at.

 

[Subman666]

I have researched and heard from other mojave owners that GoRhino a pillar mounts fit perfectly. Thats what im looking at.

Thanks for the update. Looks great. I guess I'll give them a try.
Question: whose lights and light bar did you install?

 

[malofquist]

does it block the adaptive cruise control sensor?

 

[svc707]

does it block the adaptive cruise control sensor?

Its in front but it still works ?

 

[dsmith345]

Since the light bar pillars that fit the Rubicon do not fit the Mojave, I'm asking if anyone has found one yet. I have a 2021 Mojave and still looking for pillar mounting bars that will fit the cowling for a light bar.
I can weld one up but the effort required is excessive if someone already has designed and selling them.

Sponsored