What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Casique]

Check your ground connection......

JT LIFE I think you were right on target, cleaned the ground and reconnected the harnesses and it worked. Thanks.

Sponsored

 

[Lrowe]

Installed my Motobilt Crusher front bumper last night with a Warn VR12 Evo winch. I also installed the Motobilt Crusher rear on Sunday as well.

Great looking bumper! What did you do for the license plate light- I have the LED light package on my 21 Mojave and it seems that you can have problems if you tie in the wrong type of lights. Also what are the grills on both sides for- is this to mount lights behind protection?

 

[Lost1wing]

Today I picked up a large tree stump 2k pounds give or take with my loader. A large root slid up the front engine guard and feel down between the radiator and the guard. I could not raise it any higher or let it down without causing more damage. I asked my with to get out the Gladiator and hook up the winch. With another chain secured to the stump, the Gladiator/winch was able to pull the stump free by pulling it at a 90 freeing the root from the engine guard. The wife was so proud that she could help.

 

[Studio Cope]

Great looking bumper! What did you do for the license plate light- I have the LED light package on my 21 Mojave and it seems that you can have problems if you tie in the wrong type of lights. Also what are the grills on both sides for- is this to mount lights behind protection?

Thanks! The license plate light is separate from the tail lights but I am waiting on my sensor brackets as they forgot to install them. Behind the mesh grill is a bracket (that they didn’t forget!) if you wanted to install lights you can. I just haven’t figured out what lighting package I want to go with yet.

 

[XJFanatic]

Started taking it apart. More to follow.

 

[XJFanatic]

And front is done.

 

[XraytecH]

Installed Oracle Rear Bumper LED Reverse Lights

 

[cafecito]

Finally got a legit Prius rammer and bull ring on my nose this morning

 

[margrxsalt]

i did a cmm Ram Hack for phone holder. Using Ram parts from Amazon. The only restriction for set up is that the ram ball adapter has to be straight out. The middle pics are from the driver side. I was in passenger side and did not seem to impede as a passenger. The CMM adapter allows for the bar to be moved to more positions but 10.99 versus 37.50 plus shipping. Hope this inspires you guys.

https://www.amazon.com/RAM-Mounts-RAM-B-237U-Adapter-Threaded/dp/B0059X0YIQ/ref=sr_1_1?crid=D3HMJNG9D8E8&keywords=RAM+Mounts+RAM-B-237U+Ball+Adapter+with+1/4"-20+Threaded+Post+with+B+Size+1"+Ball&qid=1645922533&sprefix=ram+mounts+ram-b-237u+ball+adapter+with+1/4+-20+threaded+post+with+b+size+1+ball,aps,124&sr=8-1

https://www.amazon.com/RAM-MOUNTS-R...Components&qid=1645922838&s=automotive&sr=1-3

all in all $53.48

 

[Wkyfiregladdy]

Oil change at the shop

 

[XJFanatic]

And complete. Glad I went with the cheap shocks the stock drivers front had over 5” with no pressure ??‍ These soak up the bumps great.

 

[cdyoung9799]

Yeah I saw the Ace video. I didn’t want to remove the OEM sliders.

I've put ACE sliders on my past 3 Jeeps (all Rubicons) because I wanted to be able to leave the stock sliders on. ACE makes a solid product.

 

[cdyoung9799]

Added the Mopar pillar brackets and LP4 lights.

That's an awesome looking truck. I would have loved to find a Gator before I bought my truck. One of the best colors they've done in years.

 

[JT Thomas]

Today's fun.

Banks Pedal Monster and a Holster.

I have a similar holster and plate. Digging the set up.

 

[RSK]

Added a zAutomotive front camera today. Updated the Tazer-mini and no issues. Most aggravating part of the project was lining up the camera at the end and trying to tighten the lens cover without the camera moving again.

Sponsored