Search results

Not pointing fingers or anything.....lol

Ordered and bought mine through Gupton, looks like a great deal!

Follow the instructions, or if you arent comfortable with them, find instructions from another brand. As long as you loosen everything (track bar, control arms at both ends) and retighten it all WITH ALL 4 WHEELS ON THE GROUND AFTER THE LIFT, you should be fine. I just did my 1.5 teraflex, my...

I also reached out to WK to know what the dimensional difference was between w/ rubi sliders vs w/o rubi sldiers. I assume one sits lower/further out? I am sure someone here will chime in about frame mounted and the forces the sliders can put on the frame, but, I believe our frames are HSS and...

Took it in ~2 weeks ago for a general check and tire rotation, asked them to look at the transmission, said their trans tech was booked a month out but they'll see what they can do. They did a hard re-learn on it, and so far, minimal issues. It still does the "slip" but only on cold mornings, in...

This is a 23 rubi w/ the full 1.5 on the front. I am on a *SLIGHT* incline in the 1st picture: The following pictures are my rubicon next to a jeep on 35s, not sure on their lift setup: I am dead nuts leveled front to rear, if there is any difference, it is small enough that rough...

My old jeep was a football stadium. with 2 sets of rigid industries pods on the A-pillars, 6 Piaa 520 Ion's on the front bumper, and a light bar... I miss it sometimes but I do not miss blowing random fuses and having to run dual batteries.

Currently running Baja SS3 Max/Elite (cant remember) fogs in golden yellow and LED switchback bulbs for the heads. My opinion, for what it's worth, the best combo is floods/fogs/driving down low, below headlight line, and spots above the headlight line. Obviously floods for ditch lights are...

The Resolution will be a massive step down. This is 550 tv lines. That equates to a resolution of ~650x450 - 750x350 (550*2=1100, then take HeightxWidth to equal 1100). Someone correct me if I'm wrong, vs. our current camera of at least 1080p. 500 Tv lines: 1080p:

Directly from the Manual: "A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While...

YOu should be good. There's a blurb in the manual that for the first (300-500 miles, I can't remember) to ensure you arent revving the piss out of it and dont maintian a set rpm for extended periods. Beyond that, first oil change at your desired interval (I stick to 5k after bad experiences with...

That's the truth, while the top goes down the on the 650, it's not the same as losing the doors and top on the jeep!

It makes for a geeen house which isn't the best, I'd rather the stables!

Best of both worlds! Volcano Orange/Red? Those shadows make it hard to tell. Guessing the r8 is Ascari? We've got a Tarocco orange 650s that we absolutely adore.

Searched a fair bit more this morning, seems that the companies that make similar brackets dont sell them individually. Looks like I'll be learning how to do bends without proper equipment.

4BT swap it and be the hero we need.

Basically. It would be nice to have a blank slate to put whatever light in there we wanted, but, now that I think about it, molding it for the design you have (seems like (2) 2.5-3inch lights) isn’t A bad idea either

Truthfully, for the ability to even get the molds, uncut, with no modifications, I would gladly pay a pretty penny.

I agree, I was hoping one of the larger names eg rigid, diode, baja, vision, would have something of similar size, but it seems I’ll have to get bar stock as you mentioned.

Okay, so… bought these pods forever ago (~3 years ago) from a reliable led shop, Seward off road, previously owned by camp 4x4 who did a bunch of custom JK’s. Anyway, I have these lights and only one u bracket. A sorta through search of the webs turned up negative, but I’m in need of a 2 1/4” u...