Search results

I’d like to put a Rubicon 3.0L EcoDiesel transfer case into my 2021 Willys EcoDiesel so I can have 4:1 low range. Can anyone confirm the correct part number for the Rubicon EcoDiesel part time 4WD transfer case? I think it’s 68298660AC It should be a bolt-in swap, but can anyone else...

I have two broken spring clips on my brake calipers where the pads slide. Can anyone help me confirm the correct part numbers to replace all the clips for my 2021 Willys EcoDiesel? It has the same calipers as a Rubicon. Thanks.

Anyone near Vancouver, WA / Portland, OR know of a good powder coating shop? Need to get some things painted.

Anyone running these Hepta Mfg weld on sliders on their JT? https://www.heptamfg.com/products/jeep-gladiator-rock-sliders?srsltid=AfmBOorY06MdhOEqHmN9qgHmODKU-bwYKFa8Ub1ZCnnLCOlJ4ztweAq1

Who has these installed on their Gladiator? I’m looking for more pics of the mounting plates at the frame. I'm talking about the weld on, frame mounted rocker guards from Motobilt shown below. https://motobilt.com/products/frame-mounted-rocker-guards-for-jeep-jt-gladiator I’m trying to...

Nitto has issued a voluntary safety recall. https://www.nittotire.com/media/o2jjlgbn/nitto-safety-recall-website-notice.pdf

Before I just order whatever, what brands do we trust for lug nuts? Any specific brands we like or dislike? I already know the specs: M14 x1.5, 60 degree conical, 2 inch total length. Probably gonna go with splined. Here’s the wheels, because pics are better than no pics.

Who is running 40s on narrow track axles? I’d like to know how close your tires get to the front lower control arms at full steering lock. I’ve had some conversations with people who’ve done it and I’ve gotten mixed responses. Some say it rubs, some say it doesn’t. Depends on wheel specs I...

Planning a 4.5” lift and I’m seeing lots of different products on the market for a carrier bearing drop, varying from 3/4” drop all the way to 2 3/16” drop. Since the lift will have adjustable upper and lower arms, will I still need a carrier bearing drop? I’d like to hear about your experience...

If you’ve painted your own front bumper I’d like to know what paint products you used and how it’s holding up. I have a raw steel bumper sitting in my garage and a general idea of what I wanna do. Would like to hear about your experience before I choose a primer and paint product. Thanks!

Anyone running RPM steering and suspension’s lift kit? @nbennettksu showed me they make a long arm 3 link for the front, so that’s pretty damn cool. Anyone using the mid arm or long arm kits with their coil springs? I’d be curious to hear about it...

I am aware that Gladiators use two different TPMS sensors depending on the build date before or after a certain point. I have a 2021 Gladiator with a build date of late Oct 2020. I'm putting together a new set of wheels and tires soon. I'd like to purchase some generic TPMS sensors from...

EDIT: This thread is DIESEL engine specific. I saw this transmission pan adds 2.5 qt capacity and was wondering if anyone is running it? I'm gonna change out my transmission fluid + filter anyway and will have to lower the pan. It would be a good time to add this aftermarket upgrade. Will it...

There are quite a few threads discussing differences in brakes sizing. To add to that, I was told by a friend that Rubicon models have larger brakes than non Rubicons? How does the diesel model fit into this lineup of brakes size? Looking into the potential for brake upgrades after going to...

Can someone recommend some inexpensive door sill plates? I’m starting to see the paint wear on my drivers side. I’m seeing some online, but most cross the door seal area. I’d like to avoid that. I just want something flat that does not contact the area where the door seals. Thanks.

Have any of you ever used a paint marker to paint holes you’ve drilled? I don’t know why I’ve never thought of this. I’ve used paint markers for things, but never after drilling holes. It seems like a quick and easy way to paint the holes without a mess to clean up. The main goal is just rust...

Alright, I’m getting closer to making some decisions on lift kit parts and shocks. I’m strongly considering going with Clayton’s premium 3.5 inch lift kit. They offer some different shock options, two of which are the Falcon 3.3 and Bilstein 5160. I realize this is a comparison of adjustable...

First time filling up today with the new-to-me diesel Gladiator. I had about 1/4 tank or less when I parked at the pump. No low fuel warning yet. I was surprised how much it took to fill up… 16.3 gal. I knew the diesel fuel tank is 18.3 gal. I would’ve expected 16.3 gal to be an amount it would...

Can anyone recommend a BUDGET inner fender liner for fronts on diesel Gladiator? I know the topic has been covered, but I didn’t see any super-recent threads. Maybe there are more products available now? I do not really want metal liners. Not excited about the cost or the potential noise. Any...

I have a question before I start this re-gear. I don’t have the axle torn apart yet, but I’m planning to install my own gears for the first time. Dana 44 narrow track axles w/o lockers. Rear has factory Willys LSD. While watching some videos, I realized I don’t really know a good way to secure...