67 Design and wireless charging

[21Moja]

Has anyone found a wireless charger that integrates into the 67 Design CF arm and 20mm ball?

Sponsored

 

[am1978]

I don’t have a 67 Design product. I use a BulletPoint.

I use this, but it’s a 17mm: Anker Car Mount Charger, PowerWave Magnetic Car Charging Mount with 4 ft USB-C Cable, 7.5W for iPhone 13 / 13 Pro / 13 Pro Max / 13 mini / iPhone 12 / 12 Pro / 12 mini (USB-C Car Charger Not Included) https://a.co/d/2MpW0QD

And I use this to go from 20mm to 17mm: 20mm Aluminum Ball to 17mm Ball Adapter. Compatible with Garmin and Other GPS Devices. https://a.co/d/cQRyhMt

I still need to install a USB outlet on top in the dash console to get rid of wires running down the dash/controls.

 

[21Moja]

I don’t have a 67 Design product. I use a BulletPoint.

I use this, but it’s a 17mm: Anker Car Mount Charger, PowerWave Magnetic Car Charging Mount with 4 ft USB-C Cable, 7.5W for iPhone 13 / 13 Pro / 13 Pro Max / 13 mini / iPhone 12 / 12 Pro / 12 mini (USB-C Car Charger Not Included) https://a.co/d/2MpW0QD

And I use this to go from 20mm to 17mm: 20mm Aluminum Ball to 17mm Ball Adapter. Compatible with Garmin and Other GPS Devices. https://a.co/d/cQRyhMt

I still need to install a USB outlet on top in the dash console to get rid of wires running down the dash/controls.

How does the magnet hold up when off-road?

 

[am1978]

How does the magnet hold up when off-road?

Installed it a few weeks back. Haven’t been off-road with it, but if your phone case doesn’t interfere with the magnet too much it’s probably about as good as any of the best out there. Mine hasn’t fallen off and we have some shotty roads in the DC area.

 

[Alans17]

I’m assuming the CarPlay doesn’t work?

 

[am1978]

I’m assuming the CarPlay doesn’t work?

I’ve been using this with my iPhone 12 Pro Max. I tried three other Carlinkit models and they were terrible. This one has a few quirks, but nowhere as terrible as the others I tried. I keep it plugged in inside the center console.

Wireless CarPlay Adapter, Turn Wired into Wireless CarPlay, for Factory Wired Apple CarPlay Car, Carplay Wireless Adapter 3.1 Upgraded Version(Car Model Year : 2016 to 2022) Auto Connect, Plug-Play https://a.co/d/3WJdIQz

 

[Warrior21]

Very early in my testing but I wanted to try something different.

I went with the following for my 67 Designs mounting system.

I connected a base plate with 20mm ball to my 67 Designs arm. I then attached a magnetic battery pack to the base plate with double sided tape. This way I can connect the cable to recharge the battery pack when I want. Otherwise, I can mount and charge my phone wirelessly

base plate -iBOLT 20mm Metal AMPS Adapter... https://www.amazon.com/dp/B099NXNG42?ref=ppx_pop_mob_ap_share

magnetic battery pack -Anker 521 Magnetic Battery... https://www.amazon.com/dp/B08TW7BRTJ?ref=ppx_pop_mob_ap_share

 

[Marlinvx]

Get the RAM one. Your phone will not fall out, ever. I rolled my sxs, phones stayed right in the cradle.
https://www.rammount.com/product-lines/wireless-charging-mounts
I have one in the gladiator as well. Currently using it with a Zfold 3, no problems.

 

[rm1515]

I use this: pitaka

I contacted 67 designs and this what they recommended. I also had to get an adapter ball from them to make it work. It works great on trails and has a strong magnet. I also use one of their cases to make sure I get the strongest connection.

 

[Gruffid]

I use the quadlock wireless charging “head” with the 67 designs Ram ball adapter

Sponsored