AmFib Low Mount Snorkel?

[narcoteca]

The AmFib Snorkel connects to the lower portion of the stock air box. To my knowledge, there are no aftermarket CAI's that use the stock lower air box, so the only way to make it work would be with some customization of whatever CAI you're using.

There is a Cold Air Intake from Mopar which includes a new upper air box lid and intake tube along with a high flow filter that would work without any modification! The inside of the air box lid is smooth without any internal ribs or bracing like the stock air box lid. The opening to the intake tube and the tube itself is also larger in diameter and it eliminates all of the sound baffling present on the stock tube for a smoother air flow.

Check it out here - Mopar Cold Air Intake

Thank you Rob. Now i know :D

Sponsored

 

[narcoteca]

We'll have a full review video coming soon! I'm very impressed with the install. The parts all seem to be very high quality and the under hood components match the look of the factory plastic intake pieces well. Once installed, the switch from low intake to the full height intake is only a matter of 4 screws.

Painting any portion or all of the snorkel pieces shouldn't be a problem at all, in fact I will be painting some of the components in the next few weeks.

Hi Rob. the drain valve always stays closed? or at what time does it open? Pardon my ignorance.

 

[Rob_Quadratec]

Hi Rob. the drain valve always stays closed? or at what time does it open? Pardon my ignorance.

Under normal conditions (basically all the time for normal driving) you want to keep the drain valve open so any water that accumulates in the filter box can drain automatically.

If you're going to be fording deep water, that's when you would close the valve to prevent any water from flowing into the airbag. Then, after crossing the water, re-open the valve.

 

[narcoteca]

Under normal conditions (basically all the time for normal driving) you want to keep the drain valve open so any water that accumulates in the filter box can drain automatically.

If you're going to be fording deep water, that's when you would close the valve to prevent any water from flowing into the airbag. Then, after crossing the water, re-open the valve.

Thanks for your quick and accurate reply wise man

 

[Daniel.cox8]

Well the snorkle as amazing as it is. The look is amazing. Today the plastic started cracking around the ancor points and snapped off on the freeway im so sad and mad now.

 

[Proteus]

What do you think caused this cracking? Cold?

 

[Daniel.cox8]

What do you think caused this cracking? Cold?

I think its possible but not sure contacted rugged ridge ro see if this is covered.

 

[Jdyowa]

I think its possible but not sure contacted rugged ridge ro see if this is covered.

Have you heard back?

 

[Daniel.cox8]

Sorry for the delays. Had to do army stuff. Got sent a free snorkle from customer service. That was amazing. But I started modding the cracked parts making stronger

 

[Daniel.cox8]

What do yall think snorkle will be back on tomorrow

 

[Daniel.cox8]

Ok guys what do you think back on and way strong no flex any more. Let me know what you think. Rob from quadratec you have any problems with your snorkle?

 

[RedRaptorJT]

Is that black caulking sealant around the trim? If so, why is that required?

 

[Daniel.cox8]

Is that black caulking sealant around the trim? If so, why is that required?

No it has seals it comes with.

 

[Rob_Quadratec]

Ok guys what do you think back on and way strong no flex any more. Let me know what you think. Rob from quadratec you have any problems with your snorkle?

I haven't had any issues with mine. I removed the tall inlet and swapped on the low profile one back in December. I don't remember seeing any cracking or issues when I swapped it over.

 

[Rubi_Rhod]

Sorry for the delays. Had to do army stuff. Got sent a free snorkle from customer service. That was amazing. But I started modding the cracked parts making stronger

Good idea! I have been worried about this exact thing happening to mine. Ive kept the high mount up all winter and so far all is well, but the plastic it mounts there is really thin so a metal plate would be great insurance.

Sponsored