Anyone installed Rubi front fenders on Sport?

[BoatDude]

FYI, I have a Sport with halogen lights, I purchased a used set of front Rubi flares that had LED DRL lights in them, I purchased Rubi flare halogen lights from dealer and swapped out the LED’s for halogens, also ordered Rubi liners from dealer, all fit together and worked properly, I used new plastic rivets and push pins from Quadratec.

Sponsored

 

[BoatDude]

FYI, I have a Sport with halogen lights, I purchased a used set of front Rubi flares that had LED DRL lights in them, I purchased Rubi flare halogen lights from dealer and swapped out the LED’s for halogens, also ordered Rubi liners from dealer, all fit together and worked properly, I used new plastic rivets and push pins from Quadratec.

 

[vicsvx]

I took a photo of the stock fender (passenger side) and the Rubicon fender (driver side) during the installation that shows the difference between the two fenders. As you can see, the Rubicon fender sits higher as evidenced by where the bottom is in reference to the grill and how the hood latch fits on the fender.

Old post I know... But are the rubi fenders also wider than a sport a? I know taller but I'm assuming wider as well

Sponsored