Death wobble help please

[Mezak]

Same issue a few years back. Lower the psi on the tires to like 30.

Sponsored

 

[jjstohr-13]

The tires could have brought some issues to light. I had that happen just going from 37” AT to a 37” MT. Heavier tire and it really made the shimmies come to the top. Check for worn ball joints, do the wheel bearing check.

This is all after taking it back to the tire shop and having them recheck their work. That’s where you start. You’ve already paid for it so let them earn that pay.

If that doesn’t work get it into a 4X shop. Let them look it over and have them point to exactly what they diagnose and SHOW you what is out of whack. That’s probably the most cost efficient way of doing it if it’s not something obvious.

I got mine going the other way, MT to AT. I would say it is the tires, but it isn't constant. Tires are either ballanced or not. Loose joints can be in alignment and then not. I drive 20 minutes to work. 5 of those have a shimmy and 15 don't. this can't be tires.