Djkemeneur
Member
- Thread starter
- #1
Any idea if the New Dometic cfx3 75dz fit in bed with factory toneau cover? I tink cfx3 75dz is 18,5’’ high...
Sponsored
The Rubbermaid Action Packer 24 gallon container at 16.9" high just fits in my Gladiator under the factory Tonneau Cover. Note that I do have the Bedrug on the floor so that adds about an inch (probably less) to the clear space. I'd say anything over 17" will likely not fit under the factory tonneau.Any idea if the New Dometic cfx3 75dz fit in bed with factory toneau cover? I tink cfx3 75dz is 18,5’’ high...
Please let us know what you find... I'm interested in the Element, too.Ok, may be I’ll check for ARB Element... it’s like 17.1. I’m closer to 17, so may be fit better.
I realy like with your slideOh man - I went through this same exercise these past two weeks:
Here are some pictures...
- Wanted the new Dometic 75 or 95 or 100 fridges (dealer is a buddy) but too tall
- my ARB 47 Classic 1 is too tall so sold that
- the Element is too tall if you want to mount it on a slide which is something I wanted
- so: ended up getting the ARB 60 Classic II with a Snowmaster slide and they BOTH fit perfect (OEM Berliner, and took out the rubber mat flooring on the slide)...no other slide would work...it was the shallowest of them all...
It works just fine with the Dometic. All it's vents are located down low anyways. I'm always careful not to jam anything too close to them.I know this is an old thread but I wonder how the fridge is working in the heat under the tonneau? I have a dometic that I used to run inside an SUV just wondering if the heat and lack of airflow under there causes any issues?