Eaton E-Locker switch location

[Joe Dillard]

I pulled the trigger on a front Eaton E-Locker today for my '21 Mojave.

Does anybody run the Eaton switch who has or can take a pic of where you had the switch installed?

TIA

Sponsored

 

[tysongladiator]

I pulled the trigger on a front Eaton E-Locker today for my '21 Mojave.

Does anybody run the Eaton switch who has or can take a pic of where you had the switch installed?

TIA

This may not exactly answer your question and I apologize for that, but you have the option of using whichever switch you like. One option is to use a lasfit switch to operate both your rear and front locker.

 

[Joe Dillard]

Thanks - yea, before I posted the thread I searched some and saw several folks running the lasfit system & it looks excellent.

 

[b-roc]

Another option is to change your mojave locker switch to a rubicon one ... I am in the middle of this right now (wiring complete ... Eaton locker to be installed 7/31).

Things that you would need
1) z-automotive harness
2) add 4 pins to the plug under the brake booster with wires routed to locker (could cannibalize the eaton harness
3) some type of programmer (I used my tazer that I was already using for other things)

If interested, let me know and I will dig up the original thread.

 

[tysongladiator]

Thanks - yea, before I posted the thread I searched some and saw several folks running the lasfit system & it looks excellent.

Yes, and it also gives you two extra aux switches, requires no programming, and its easy to install.

Side note: I just realized from the pic that my dash is dirty as hell!!! Good grief I need to clean this thing!!!???

 

[Joe Dillard]

Here's what the current area looks like on my '21 Mojave.

Sponsored