Export Gladiator Owners, need help

[JTRUBI]

Hey guys, so I need some help from some of our fellow Gladiator owners, export owners. Basically anyone that owns a Gladiator outside of North America.

I have slowly converting my Canadian spec Gladiator to Export Spec, but I need a little help with a couple things.

I need someone to remove The tail lamps and take a picture of the connector on the rear as well as the harness it plugs into ( both tail lamp and body side)

I’ve been trying to figure out if the tailights use the same wiring and just are reprogrammed to use the separate turn/brake lamps or if The wiring is different.

With the rear fog lamps and mirrors I got I was only able to realize with the harness I bought after, I still have to rewrite the rest to get them to work and I didn’t need to buy the harness, so trying to figure out if this will be the same with the tail lamps.

I am only looking for those with the clear tail lamps with Amber turn signals.
Thanks in advance for your help.

Sponsored

 

[Jimmij]

Anxiously awaiting the results

 

[JTRUBI]

Any export owners here ? I’m pretty sure I saw some

 

[Mr._Bill]

Any export owners here ? I’m pretty sure I saw some

There are some. Try adding a post to the Staging Area in the European and Australian sections to get their attention.

 

[JTRUBI]

There are some. Try adding a post to the Staging Area in the European and Australian sections to get their attention.

I’ll try that, if you know anyone that maybe we can tag here that will help.

 

[JDB81]

Ill try and have a look for you, is there a post on how to get the tail light out hahhah

 

[JTRUBI]

Ill try and have a look for you, is there a post on how to get the tail light out hahhah

I think it’s just the two bolts on the inside of the tailgate and it pulls out.

 

[JDB81]

Here you go let me know if you need any more

 

[JTRUBI]

thank you,

I’m going to pull mine later today and check if they are the same. Fingers crossed and then all I’ll have to do is use the JSCAN to get them activated.
Thank you again.

Here you go let me know if you need any more

 

[Jimmij]

Let’s us know how it turns out

 

[Jaxmax]

So what is the difference on the export mirrors, looks like a turn signal indicator maybe? Larger ?........Jack

 

[JDB81]

The Export Mirrors have the indicator on the side as well as different Mirrors ( the physical glass) for local compliance

 

[Phil Raptor]

Hi Chris, Where did you buy these clear tailights ?

 

[Penecalea]

Excited to see if these use the same wiring would love to run these. anyone have any updates?

 

[JTRUBI]

So I decided to go outside and take a look at mine right now. Been so busy but haven’t gone and pulled it out.

Sponsored