Fitting 4 Wheeler in the Bed?

[futzin']

Yeah I should be good; will have to watch the front though with my winch. 25x8-12, 25x10-12 rear

Now, I wonder if a JTR can haul this plus a Pioneer 500 on a 5x8 utility trailer? Would make it close on the payload number . . .

Thanks again, @Jimmy-

Sponsored

 

[Bbannongmu]

How are you guys transporting your ramps with the ATV taking up so much real estate? Haven’t tried this yet. Would love to leave the trailer at home when I’m taking just 1 ATV but need ramps.

 

[Jimmy-]

How are you guys transporting your ramps with the ATV taking up so much real estate? Haven’t tried this yet. Would love to leave the trailer at home when I’m taking just 1 ATV but need ramps.

My ramp folds up and slides under the ATV.

 

[Bbannongmu]

My ramp folds up and slides under the ATV.

Thx. Gonna try this when I get some time.

 

[Jeepnoob34]

No winch, but there is room between the front and the window. Here is a pic from the other side, you can see the gap better. Also, the wheels and tires are bigger than stock, so stock wheels and tires will have more room.

I’d be nervous that the front of the quad would scratch or break the rear window glass. I’d probably get one of those hitch mounts to secure it.

 

[Bbannongmu]

I’d be nervous that the front of the quad would scratch or break the rear window glass. I’d probably get one of those hitch mounts to secure it.

I’ve used scrap pieces of wood against the front of the truck bed for years as a spacer to protect the window with mowers, ATVs, etc. cheap, easy “spacer”. Probably do the same if my front rack looks like it’s going to get into the window.

 

[Mulewhisperer]

With 37’s and no lift I bottom out when driving up the ramps to load. The angle is only going to get worse with a lift.

 

[Jeepnoob34]

2017 Honda Rancher with 26x11-14 rear tires and 26x9-14 front tires.

Am I seeing this right? Looks like ya pulled the front tires up on the wheel wells. I have a Honda rancher and am curious to see how I could cram it in my truck. I have a trailer, so it’s not a huge deal if it doesn’t fit

 

[cpgeorge25]

Here is your answer. Technically it fits but I’m not sure I love it. It’s a 2015 Sportsman 570

this is awesome! I pick up my new Polaris sportsman 570 in a couple weeks and was nervous about loading it into my Gladiator. Thank you for posting such detailed pictures. What did you place in front of the ATV to keep it from hitting the rear glass?

 

[Troybilt]

With 37’s and no lift I bottom out when driving up the ramps to load. The angle is only going to get worse with a lift.

Sounds like it's time to lift the quad

 

[DAVECS1]

225 miles the last 3 of them up a logging trail. Done it 4 times now. Works great.

 

[cpgeorge25]

2017 Honda Rancher with 26x11-14 rear tires and 26x9-14 front tires.

What did you put in front of the ATV to keep it from hitting the glass? Great pictures. Exactly what I needed to see

 

[cpgeorge25]

225 miles the last 3 of them up a logging trail. Done it 4 times now. Works great.

How was it during on the highway? Picking my ATV up on the outskirts of Baltimore and I’ll be driving on busy 695 for a bit.

 

[DAVECS1]

How was it during on the highway? Picking my ATV up on the outskirts of Baltimore and I’ll be driving on busy 695 for a bit.

It was excellent on and off road. Was like it was not even there. I cross strapped it with ratchet straps underneath using the D rings in the bed. I do 70-75, no issue what so ever. Does not even squat that much.

 

[Loosescrews]

With 37’s and no lift I bottom out when driving up the ramps to load. The angle is only going to get worse with a lift.

Great looking toys! I am currently Raptor shopping. Looks like I will have to find a small hill to back mine up to when loading as I am on 3 inches of lift and 38s.

Sponsored