Gladiator Bike Rack?

[drew0622]

Rockymount Gladiator track system & 2 Hotrods.

Outfitted with 650b wheels, I still have to test with 700c, but it looks like there is just enough room.

The fork mounts are called Hot Rods? Looks like your forks are thru axel like mine. They look to fit just fine!!

Sponsored

 

[In3briatedPanda]

i use a kuat transfer 2.

 

[IRQ]

The fork mounts are called Hot Rods? Looks like your forks are thru axel like mine. They look to fit just fine!!

In the photo are 2 Hotrods SKU 10870 and 9mm QR sleeve SKU 10730

The Hotrods come with a few different size through axle adapters

 

[drew0622]

In the photo are 2 Hotrods SKU 10870 and 9mm QR sleeve SKU 10730

The Hotrods come with a few different size through axle adapters

Thanks for the info! One last question, what tonneau cover is that?

 

[IRQ]

Thanks for the info! One last question, what tonneau cover is that?

Bestop EZ Roll

 

[SaplingT]

I finally finished a mount I am happy with. These DO NOT flex! Works great with the 1UP trays. These are 1/4" steel. I will be making them in aluminum also to test.

Did you ever release these? I don't see them on your website. Thanks!

 

[813 Fabrication & Design]

Did you ever release these? I don't see them on your website. Thanks!

I did not move forward with them. But, I have the steel prototypes (4 total) and also a set of prototypes in aluminum (2 only) if you are interested in a set of them.

 

[SaplingT]

What was the degree of angle they were built at?

 

[813 Fabrication & Design]

What was the degree of angle they were built at?

I modeled them to match the approximate 70° angle of the VooDoo Fabrication rack.

 

[HouseOfWolves]

Went with the Mopar bed utility rails with cross bars, and Yakima trays -- as shown in my profile pic.

Went with this setup because it still allows me to pack a ton of gear under the rack system, and it doesn't extend the length of the gladiator for off roading. Also, those Yakima trays can be moved back and forth between all of my vehicles' rack systems.

 

[drew0622]

Can you tell me what the part is that mounts your front wheel? Also, could it be mounted upside down, so that when not in use, a soft tonneau cover could cover it? Thanks!

 

[drew0622]

Bestop EZ Roll

Hello......I'm copying your bike setup exactly. How are you liking the Bestop EZ roll? Twill or Diamond material? The cover is the last piece to my puzzle. Thanks agin.

 

[IRQ]

Hello......I'm copying your bike setup exactly. How are you liking the Bestop EZ roll? Twill or Diamond material? The cover is the last piece to my puzzle. Thanks agin.

It is twill, Ive had no issues with it… though I would probably get the Mopar roll version if I had to do it again just for convenience.

Take care with the Allen screws on the mounts, there isn’t much room for error between tight and stripped.

 

[drew0622]

Love this setup, thanks for the advice from this thread.

 

[htremper]

Love this setup, thanks for the advice from this thread.

Big Ring and Big Ring?

Sponsored