Looks great. Would be interested in the details in how you put that together. Feel free to PM if you want or share on the forum if you do not mind.My seat delete platform. I could not justify the price for GG. I think mine turned out just as good with more access to the space under the platform. Also removed the plastic storage compartment on the drivers side for an additional 6" of space. Whole thing is covered in paint on bed liner.
Can you explain the steps to remove the plastic storage compartment on the drivers side? What comes off in what order? I must be too dense to figure it out. ThxMy seat delete platform. I could not justify the price for GG. I think mine turned out just as good with more access to the space under the platform. Also removed the plastic storage compartment on the drivers side for an additional 6" of space. Whole thing is covered in paint on bed liner.
I had work done on my right bumper and right rear side panel replaced. Not sure why, but in the process they pulled the protection sticker off the back right tire/wheel fender. Can you have the sticker replaced?
There are 2 screws in the bin that must be removed and then it is plastic clipped into the panel above. I pulled & pryed until it came loose. Nothing broke but i would not advise taking my approach or you could break something lol.
No worries, I was hoping there was some secret that I was missing. I need to remove the section in order to be able to mount my fridge sideways. I have the Goose Gear platform. I'm kinda ashamed for not trying to make my own platform. Your build is great, including your DIY seat delete. Thx
What fridge do you have? I have a dometic cfx3 55IM. It fit sideways without removing that tray
That’s really nice!!!!My seat delete platform. I could not justify the price for GG. I think mine turned out just as good with more access to the space under the platform. Also removed the plastic storage compartment on the drivers side for an additional 6" of space. Whole thing is covered in paint on bed liner.
I have a CFX 75DZ. It's huge, but was on sale and no more than a 50. It'll fit with that section removed. I could place in the bed, but have other plans after my GFC is done. Thx
How are you powering your fridge? In the center console? I'm eager to do the exact same set up as you.Engel MT45 fridge fits with the 40% delete from Goose Gear.
Yes, JT converter while driving and Solar generator when set up.
Nope. Ran a dedicate 12v power port just for the fridge, independent of the OEM wiring. 12ga fused at the battery.
I hear ya....23+year vet....definitely skews the senses, A LOT, lol
Great job!My contribution to the diy solution. I originally planned to cut out a piece of the driver's side panel to access the bolt storage solution as you can see by the outline on the wood before coating it but ultimately decided to just relocate that storage box somewhere else. I also have the non-subwoofer rear so slightly different layout of the tray thats normally under the seat.
