How far does your Front Bumper Stick out?

[okiesnake]

I really want to add a winch but of course that means I need a new bumper. Problem that I have is I have a small garage and can't add much (if any) to the overall length of the vehicle . The OEM bumper sticks out about 10 ½”. Any bumpers out there that will keep me close to that?

Sponsored

 

[EddyArnold]

maybe this one ¯\_(ツ)_/¯
https://www.jeepgladiatorforum.com/...r-record-time-and-zero-sag.59417/post-1002110

 

[whiteglad]

The Rugged Ridge Arcus won't stick out more if you cut part or all of the big hooks.

 

[Jaxmax]

I think there are a lot of winch bumpers that don’t stick out very far, perhaps less than the factory ones with the crash cans. Go to the winch section and scroll through there there are a lot of pictures of different bumpers.

 

[RockJeep98]

This is available w/out the tube work also. It’s a Frame chop so you will gain clearance underneath. To the edge of the D ring is about 11.5”s.

View attachment 297404

 

[JohnFinx]

That's an awfully personal question.

 

[WILDHOBO]

I really want to add a winch but of course that means I need a new bumper. Problem that I have is I have a small garage and can't add much (if any) to the overall length of the vehicle . The OEM bumper sticks out about 10 ½”. Any bumpers out there that will keep me close to that?

I just measured mine for you. What ncluding the recovery points, it sticks out 11.5” from the grill. If they were cut off and you came up with an alternate recovery point method, it would be under 10”.

 

[okiesnake]

maybe this one ¯\_(ツ)_/¯
https://www.jeepgladiatorforum.com/...r-record-time-and-zero-sag.59417/post-1002110

Something to consider. Thanks

 

[okiesnake]

I just measured mine for you. What ncluding the recovery points, it sticks out 11.5” from the grill. If they were cut off and you came up with an alternate recovery point method, it would be under 10”.

What front bumper do you have?

 

[WILDHOBO]

What front bumper do you have?

Warn Elite Full Width. Warn part number 101335. I think 101337 is the one with the bull bar, but I didn’t want it.

 

[WILDHOBO]

What front bumper do you have?

The Pritchett canyon bumper seems pretty low profile from the pictures I’ve seen, and it’s super cool. Had I known about it, it might have beat this one out.

 

[WILDHOBO]

The Pritchett canyon bumper seems pretty low profile from the pictures I’ve seen, and it’s super cool. Had I known about it, it might have beat this one out.

https://barnes4wd.com/products/jl-and-jt-pritchett-canyon-front-bumper

 

[Readyt]

Mopar Steel bumper fits to the same spec and the looks stay the similar

 

[bleda2002]

Evo 1/4 pound is super low profile, basically just sits on the front of the frame.

 

[WILDHOBO]

Evo 1/4 pound is super low profile, basically just sits on the front of the frame.

I forgot about that one. Good call.

Sponsored