- First Name
- Jesse
- Joined
- Jan 5, 2021
- Threads
- 4
- Messages
- 55
- Reaction score
- 17
- Location
- Cleveland Ohio
- Vehicle(s)
- 2021 jeep gladiator willys
- Occupation
- Software developer
- Thread starter
- Banned
- #1
Jeep Gladiator marker lights. Easy to install and easy to wire up. Just grab 10 amp fuse piggy back from your local auto parts store and add them to a fuse that kicks on with the truck(f51 is what I use see image). D.O.T. approved, ip67 waterproof L.E.D lights included. The adapters are 3d printed. Pretty much just press in spot. I do recommend adding a little hot glue to help keep them in. Hot glue is easy to remove. But if you plan on never removing them use something more permanent.
Note:
On some of the lights (+) is the white wire, some (amber, green) it's the black. Just touch wires to battery to verify: 1 they work properly and 2 which way they should be connected. You won't hurt the light plugging them in backwards but they won't work in reverse. They will all match when you get them. Also this is for the honeycomb grill only. You need the one in all the pictures.
Available colors:
Red, white, blue, green, amber. The white ones are not smoked lenses but the rest are. Will make any combination you want of colors.
Pricing (paypal only):
3 X 50
7 X 80
10 for each additional
Free shipping.
Military, veterans, police, ems, and firemen $10 dollars off.
Stuff needed:
Wire (2 x about 3 feet)
solder or crimp connectors
electrical tape
Wire insulation (not mandatory)
fuse piggyback
2 wire connector (not mandatory)
Hot glue gun (not mandatory)
If you bought my old style and want these I'll discount the full amount you previously paid. These are much better.
Note:
On some of the lights (+) is the white wire, some (amber, green) it's the black. Just touch wires to battery to verify: 1 they work properly and 2 which way they should be connected. You won't hurt the light plugging them in backwards but they won't work in reverse. They will all match when you get them. Also this is for the honeycomb grill only. You need the one in all the pictures.
Available colors:
Red, white, blue, green, amber. The white ones are not smoked lenses but the rest are. Will make any combination you want of colors.
Pricing (paypal only):
3 X 50
7 X 80
10 for each additional
Free shipping.
Military, veterans, police, ems, and firemen $10 dollars off.
Stuff needed:
Wire (2 x about 3 feet)
solder or crimp connectors
electrical tape
Wire insulation (not mandatory)
fuse piggyback
2 wire connector (not mandatory)
Hot glue gun (not mandatory)
If you bought my old style and want these I'll discount the full amount you previously paid. These are much better.
Sponsored
Last edited:
