Mopar LED Lights on Backorder

[jared19951]

I ordered the Mopar LED headlights to replace the factory halogen back in December 2022. I keep receiving updates that the lights are on backorder. Anyone else having issues getting their hands on the Mopar LED headlights? Is there a particular supplier production issue?

Sponsored

 

[soupbill]

same here they keep pushing them back a month at a time

 

[jav_eee]

Get them off eBay ¯\_(ツ)_/¯

 

[ecidiego]

Give up on the kit if you have a 2021+. It's been backordered for over 1.5 years. The lights are readily available. It's the kit with the "halo harness" and several rivets that is not being kitted. Check out when I made this thread and when I last posted in it ( last post ):

https://www.jeepgladiatorforum.com/...-82215136ae-oem-led-headlights-in-2022.53861/

The kit has not been available since. Buy the left and right lights separately. You pay a little more but don't have to wait until you're dead. Only 2020s need the kit with the "halo harness" that needs ran to the BCM. All 2021+ 3.6 are plug and play. 3.0D need a passenger side extension harness that's like 10" long:

Lights:

Right: 55112878ag
Left: 55112879ag

Harness for Diesel:

2021+ 3.0D ONLY: QTY 1 of: 68414409AB

They'll ship fast and you'll get your lights in. 2020 owners will need to custom make the halo harness and wire it in following the kit instructions. 2021+ 3.6 and 3.0 are CAKE with just the 2 lights + the harness above if you have the diesel. No harness needed for 3.6L. Naturally, you have to program the BCM to make them work:

CBC Features: LED Low Beam Lamps Present: Yes
CBC Features: LED High Beam Lamps Present: Yes
CBC Features: Quad Headlamps Enable: Yes
CBC Extern.Light Calibr.: Dual Filament Headlamp: No

** IF ** you have a 2021 or newer 3.6L OR ran the "Halo wires" to BCM A5 and A7 on your 2020 from headlights to BCM OR added a passenger side jumper for your 2021 or newer 3.0D:

CBC Config I/O Usage: Signature Lamps or Mirror Repeater Present - Pin A5 & Pin A7: Signature Lamp
CBC Extern.Light Calibr.: Signature Light Present: Yes

 

[getbo]

Give up on the kit if you have a 2021+. It's been backordered for over 1.5 years. The lights are readily available. It's the kit with the "halo harness" and several rivets that is not being kitted. Check out when I made this thread and when I last posted in it ( last post ):

https://www.jeepgladiatorforum.com/...-82215136ae-oem-led-headlights-in-2022.53861/

The kit has not been available since. Buy the left and right lights separately. You pay a little more but don't have to wait until you're dead. Only 2020s need the kit with the "halo harness" that needs ran to the BCM. All 2021+ 3.6 are plug and play. 3.0D need a passenger side extension harness that's like 10" long:

Lights:

Right: 55112878ag
Left: 55112879ag

Harness for Diesel:

2021+ 3.0D ONLY: QTY 1 of: 68414409AB

They'll ship fast and you'll get your lights in. 2020 owners will need to custom make the halo harness and wire it in following the kit instructions. 2021+ 3.6 and 3.0 are CAKE with just the 2 lights + the harness above if you have the diesel. No harness needed for 3.6L. Naturally, you have to program the BCM to make them work:

CBC Features: LED Low Beam Lamps Present: Yes
CBC Features: LED High Beam Lamps Present: Yes
CBC Features: Quad Headlamps Enable: Yes
CBC Extern.Light Calibr.: Dual Filament Headlamp: No

** IF ** you have a 2021 or newer 3.6L OR ran the "Halo wires" to BCM A5 and A7 on your 2020 from headlights to BCM OR added a passenger side jumper for your 2021 or newer 3.0D:

CBC Config I/O Usage: Signature Lamps or Mirror Repeater Present - Pin A5 & Pin A7: Signature Lamp
CBC Extern.Light Calibr.: Signature Light Present: Yes

Do you have any installation video for the 2021+? I have a 2023 rubicon I am planning on upgrading the halogen lights to the OEM LED lights. I was looking at the installation pdf and there were lots of stuff going on lol. If you have/seen any installation video for the 2021+ that would be greatly appreciated.

 

[ecidiego]

There's a new part # for the kit and they're available.

82219141AA

 

[Minty JL]

For the price point you're better off with the Diode Dynamics Elites LED headlights. Brighter and more options for less money.

I went from OEM LEDs to the Diode Dynamics and it was well worth it. IMO

Sponsored