Morrflate 10-6 Compressor

[1945gpw]

I purchased a MORRFlate TenSix compressor two years ago and it has held up well.

Having a 4-way inflation capable compressor was an eye opener for me. I had been airing down using Staun deflators on each wheel and airing up one tire at a time.

I found a list of parts and instructions on how to make a 4-way inflation system and put one together.

Thanks for the reply. do you know how much you got into your hose system? I haven’t priced all the parts out yet but was thinking of doing that instead of spending almost 200 on the pre made kits if it’s a lot cheaper.

Sponsored

 

[TestMule]

Thanks for the reply. do you know how much you got into your hose system? I haven’t priced all the parts out yet but was thinking of doing that instead of spending almost 200 on the pre made kits if it’s a lot cheaper.

I have about $155 in the hose system. See the attached spreadsheet. Everything came from Amazon.

 

[JTenn]

Thanks for the reply. do you know how much you got into your hose system? I haven’t priced all the parts out yet but was thinking of doing that instead of spending almost 200 on the pre made kits if it’s a lot cheaper.

I have to admit i just bought the Morrflate one. It was around $225-$250 best I can remember. You definitely can build one for less $$ but at the time I didn't have the time to source it all and assemble it. It came with a digital gauge and decent storage bag and as a bonus for me the hoses are bright green like my JT, lol. I really do like the clip on valve stem ends though. They are very well built and high quality.

 

[1945gpw]

I have to admit i just bought the Morrflate one. It was around $225-$250 best I can remember. You definitely can build one for less $$ but at the time I didn't have the time to source it all and assemble it. It came with a digital gauge and decent storage bag and as a bonus for me the hoses are bright green like my JT, lol. I really do like the clip on valve stem ends though. They are very well built and high quality.

yeah looks like the hose system is about 205 now plus a 10% discount it’s only like 40 extra from building one so will see might just go that route as it looks like a nice system all around.
do you have the pump stored in the bag it comes with? Was thinking of getting a larger plastic ammo can or pelican type case to put it in. Anyway Thanks for the info guys

 

[JTenn]

yeah looks like the hose system is about 205 now plus a 10% discount it’s only like 40 extra from building one so will see might just go that route as it looks like a nice system all around.
do you have the pump stored in the bag it comes with? Was thinking of getting a larger plastic ammo can or pelican type case to put it in. Anyway Thanks for the info guys

I keep the compressor in a Milwaukee packout container with the rest of my recovery/off roading gear. I just ratchet strap the packout to the tie down loop at the tailgate end of the bed. Been through some crazy stuff and it's never moved.

 

[Mojave20]

yeah looks like the hose system is about 205 now plus a 10% discount it’s only like 40 extra from building one so will see might just go that route as it looks like a nice system all around.
do you have the pump stored in the bag it comes with? Was thinking of getting a larger plastic ammo can or pelican type case to put it in. Anyway Thanks for the info guys

Another 4 hose kit to consider is 4x4 Colorado, on sale for $129. I’ve been using this with the Thors 10.6 compressor and has been a good combo.
https://www.4x4colorado.com/product...-deflation-system?_pos=1&_sid=f4b6bf9ac&_ss=r

Sponsored