New fender flares? Let’s see ‘em

[Jonathan G]

Just saw these fender flares added to Quadratec. Thinking they might be the solution to my Willy feeling small… in the wheel wells.

• Anyone have these? (Let’s see some pics)
• Easy to install?
• Any issues since installing?
  
  
  https://www.quadratec.com/p/quadrat...c+Baja+HD+Fender+Flares+for+'20-'23+Gladiator

Sponsored

 

[redfish]

Interesting option

Needs liners

 

[fishburger]

I saw them talk about these at sema on the jeep truck they built.

 

[darkhorse13]

I've got Nemesis Notorious flares and liners coming next week for my Rubicon. I wanted to get away from the plastic look otherwise I would have chopped these with the AAL brackets. The Quadratec's though look like a great alternative to OEM Rubi flares... but they do "force" you to figure out inner liners still. You can probably find OEM Rubi fenders & liners used for around the same price (hint hint)

 

[exfil offroad]

Just saw these fender flares added to Quadratec. Thinking they might be the solution to my Willy feeling small… in the wheel wells.

• Anyone have these? (Let’s see some pics)
• Easy to install?
• Any issues since installing?
  
  
  https://www.quadratec.com/p/quadratec/baja-hd-fender-flares-gladiator-jt-12510-5231?sc_src=email_2531957&sc_lid=178964318&sc_uid=03Ar6ZxTmw&sc_llid=149143&sc_eh=130fdd6ea4837f431&utm_source=Quadratec+Newsletter&utm_medium=email&utm_campaign=20230118+PL+Inner+Fender+Liners-2023011817&utm_content=-IMAGE+md_1045733.jpg-+Quadratec+Baja+HD+Fender+Flares+for+'20-'23+Gladiator

If I were to put some on, these are high on the list. You can beat them with a hammer and they deflect. Jeep Wrangler JL 2018-2023 Front & Rear 4 Piece Polyurethane Fender Flares Kit (kbdbodykits.com) Also I realized i attached the JL link. They make them for gladiators too.
Jeep Gladiator JT 2020-2023 Front & Rear 4 Piece Polyurethane Fender Flares Kit (kbdbodykits.com)

 

[JTenn]

Just saw these fender flares added to Quadratec. Thinking they might be the solution to my Willy feeling small… in the wheel wells.

• Anyone have these? (Let’s see some pics)
• Easy to install?
• Any issues since installing?
  
  
  https://www.quadratec.com/p/quadratec/baja-hd-fender-flares-gladiator-jt-12510-5231?sc_src=email_2531957&sc_lid=178964318&sc_uid=03Ar6ZxTmw&sc_llid=149143&sc_eh=130fdd6ea4837f431&utm_source=Quadratec+Newsletter&utm_medium=email&utm_campaign=20230118+PL+Inner+Fender+Liners-2023011817&utm_content=-IMAGE+md_1045733.jpg-+Quadratec+Baja+HD+Fender+Flares+for+'20-'23+Gladiator

Rugged Ridge max terrain. One picture shows the comparison between stock and aftermarket. About 4" difference.

 

[exfil offroad]

Rugged Ridge max terrain. One picture shows the comparison between stock and aftermarket. About 4" difference.

Those replicate the rubicon level trim fenders where they are lifted higher. nice.

 

[Zero_Accel]

+1 for the Max Terrain Flares.

I wrote about them in this thread, one of my favorite purchases for this truck. Love the look and clearance I gained.

 

[exfil offroad]

Two things, thats a clean truck, and you should think about cutting holes for those autolynx. Your going to jam things up if you really flex them (if you ever take it off road! Just Jokes... ?)

 

[JTenn]

+1 for the Max Terrain Flares.

I wrote about them in this thread, one of my favorite purchases for this truck. Love the look and clearance I gained.

Very nice!!

 

[Camaroboi13]

I got the Bushwacker Hyperform fender flares for my wife's JLU Sport. Same thing, a 3" difference between stock and Bushwacker. What I liked most is they came with an LED sequential turn signal to replace the boring halogen lights that came with the sport model. The instructions show that you can cut part of your stock inner fender liner and reuse them just fine. It even has a cutting template. I figured if I was going to be in there, might as well just get her some aftermarket fender liners at the same time. I would imagine that the ones the OP showed are probably the same, and that you could cut your stock fender liners. Not my wife's but an example of the fenders:

 

[cafecito]

It looks like the passenger flare is coming apart a bit in the fourth pic. Is that just something loose that needs to be snapped back in?

 

[darkhorse13]

You selling?

Yep! DM me if you'd like details

 

[Zero_Accel]

It looks like the passenger flare is coming apart a bit in the fourth pic. Is that just something loose that needs to be snapped back in?

Just the way the lights sit in the flare, they have a lot of adjustment and I ended up tweaking them a bit so that it sat a bit more evenly.

 

[Elgin]

+1 for the Max Terrain Flares.

I wrote about them in this thread, one of my favorite purchases for this truck. Love the look and clearance I gained.

This is really nice. Does OEM inner fender still work?

Sponsored