Pictures of 37’s on your gladiator

[SandSurfer]

1 1/2" leveling kit with 2" bump stops on the front, rear is bone stock.

Sponsored

 

[joshua27]

2.5” RC up front and 3/4” day star spacers in rear. 37x12.50r20 Cooper Discoverer STT Pro tires.

My fiancé is 5’ tall and 5 gallon bucket for comparisons sake.

 

[Linx]

Just finished up my lift today, Mopar 2” with a 3/4” spacer up front, the Synergy sector Shaft brace and Yeti front trac bar. Since I had it apart, went ahead and added the brace and trac bar. Upgraded from the 2” Daystar spacer lift. The Mopar lift and spacer added exactly 1.75” up front (with the 3/4” spacer) and 1.625” to the rear. Wheels are Quadratec Extremes 17x9 with 37x12.50 KM3’s. Forgot to note that I akso added the Yeti stabilizer relo bracket and a Fox ATS, set it to 17 clicks and it works well. Had the Falcon Nexus adjustable on my old JK, but found a deal on the ATS so figured I’d give it a try.

So the mopar lift only added 1” of height?!?

 

[CG07SUT]

So the mopar lift only added 1” of height?!?

The Mopar lift added 1” to the Daystar 2” lift or 3 “ of lift from stock.

 

[LACastillo]

37” Patagonia’s on Black Rhino Overlands

Hi, nice combo, can you send the specs on the tires, rims and lift?

 

[Mike25]

37/13.50/20 Nitto Ridge Grapplers, 2 inch teraflex up front and 3/4 day star in the back, mopar lift front lower control arms. I think it rides better than when stock.

 

[chsapeak]

2.5" lift 37

x12.50x18's with Fuel Beast wheels. I have the 4.10 gears and the truck rolls perfectly on the 37's

 

[SLC Rubicon]

37x12.50R17 Mickey Thompson Baja Boss AT. Stock diesel Rubicon suspension...Pending moderate lift.

 

[Desert Outlaw]

38x13.5r17s on the trail last week

 

[Desert Outlaw]

How do you like the Patagonia tires those are the tires I am looking at in that size your gladiator is sharp

I have 20,000 miles on my Patagonias and they are at around ½ tread wear. I plan to 'wheel And drive them to near bald before replacing them as I do with all of my tires.

 

[Sunnysideup]

Evo 3.5 inch lift, Ridge grappler 37 inch on 17's, Method 17 inch with bead grip tech.

 

[Boostnu]

Mopar lift, 3/4 spacer up front and Currie Antirock.
Metalcloak fenders, control arms and differential covers. Scs K5 wheels with 37/12.5/17 Yokohama geolander x-at tires. Yukon 5.13 gears

 

[Mathnerd]

Just installed a Clayton 2.5” Ride Right and Fox 2.0 RR valves by Accutune with 37x12.5R17 Kenda Klever MT2 on Method 702’s in 17x8.5 ET0.

 

[Minty JL]

My '23 HVY JTM w/ a MC GC 4.5 on 37x13.5 Maxxis RAZR M/Ts and my buddies '23 HydroBlue w/ a MC GC 3.5 on 37x12.5 Nitro Terra Grabblers.

After a fine tune alignment session. Still need to dial in the front trackbar and LCAs for the caster.

 

[Greg_L]

Sponsored