Sponsored
chorky
Well-Known Member
- First Name
- Chad
- Joined
- Feb 26, 2022
- Threads
- 175
- Messages
- 3,466
- Reaction score
- 3,801
- Location
- Montana
- Website
- www.youtube.com
- Vehicle(s)
- '22JTR, '06 LJ, '06 TJ GE
- Build Thread
- Link
- Occupation
- GIS Specialist
how well does that ceramic stuff actually work? I'm thinking of doing a very light tint in the rear and maybe a slightly darker up front - dont want to ruin my low light visibility for hunting season but still would like to take advantage of less UV transmissionI just got mine. 20% ceramic on the front, 70%ceramic on the back to make them match.
A 2
Well-Known Member
- Joined
- Jul 4, 2020
- Threads
- 83
- Messages
- 879
- Reaction score
- 1,053
- Location
- N. San Diego
- Vehicle(s)
- 2021 JTRD, 2020 JLU
- Build Thread
- Link
- Occupation
- Construction
It’s been a great base for our project. Max is 3500. loaded with the bike is probably just under 3000.
polarisTXguy
Well-Known Member
- First Name
- Mike
- Joined
- Aug 10, 2021
- Threads
- 9
- Messages
- 122
- Reaction score
- 377
- Location
- Denton, TX
- Vehicle(s)
- Gladiator Mojave, F350, Boss 302, Mini, Ram1500
- Occupation
- Polaris Industires
20% all the way around but skipped the rear center small window to make it easier to see at night
Last edited:
Sponsored
Quail 01
Member
Nice setup. Are those 35x11.5 tires?Got the fronts to match the rears whatever that is. Then the front windshield I know is at 40 or at least I was told that.
Sarge502
Well-Known Member
basically. To be exact they are 295/70/18s which is nearly a 35 equivalent.
34.4 x 11.6 to be exact on paper
Sarge502
Well-Known Member
Technically no full out lift. Swapped my Overland shocks and springs for Rubicon take offs. That gave me A little over half inch lift in itself due to diff eve in spring compression rates. Then I just have the teraflex 1.5 inch front leveling kit. So all in all that gave me about 2 full inches of lift from the stock form without having an actual lift kit.
Eventually I'm going with the Mopar lift and will run the 1 inch spacer from the leveling kit with it to compensate for my steel bumper and winch (eventually).
Sponsored
Minty JL
Well-Known Member
- First Name
- Jeremy
- Joined
- May 15, 2019
- Threads
- 25
- Messages
- 4,795
- Reaction score
- 7,613
- Location
- Ft Meade, MD - AOR
- Vehicle(s)
- 23 JTM - 19 JLUR - 22 Compass LTD - 04 355 ZQ8
- Occupation
- USA(R), DoD - Dirty Contractor
Ceramic tint done yesterday. Had the do the fronts and top of the windshield to match the rear.......almost dead on.
ATL_Rubi
Well-Known Member
Reviving an old thread but it seems to be the more recent of threads for window tint.
Who’s got 5% for 5 windows (front and rear + back glass)?
Trying to gauge if I need to do 30-35 on the windshield or not.
My old JK had limo tint on the rear and 5% up front and was fine since the glass house on it was so small, and my VW had 5% all around with 35 on the windshield which worked with the larger windshield.
Who’s got 5% for 5 windows (front and rear + back glass)?
Trying to gauge if I need to do 30-35 on the windshield or not.
My old JK had limo tint on the rear and 5% up front and was fine since the glass house on it was so small, and my VW had 5% all around with 35 on the windshield which worked with the larger windshield.
flycast209
Well-Known Member
I'm taking mine in for 35% (lowest legal in MT) on the sides toda. I've gone too dark on my other vehicles and can't see at night. Plus the cops around here look for any reason to pull you over.
OneManClan
Active Member
I know it says “show me”, but I’m from Nevada and not Minnesota! I did 15% all the way around with the ceramic option to block UV. Living in Nevada the extra tint is very much appreciated 8 months of the year. I’ll simply roll the windows down for law enforcement if I’m ever pulled over. Had to sign a waiver for the installer for exceeding the legal limit on the front. Breaking the law breaking the law !
Sponsored
