Tailgate Pad that works!

[MOJAVEC22]

Recently installer my Fox pad, and works perfectly with my Mopar soft Trifold and BMX Cruiser

i like the fox but does it allow the camera to be used?

Sponsored

 

[jo.jacques]

i like the fox but does it allow the camera to be used?

I doesnt unfortunately

 

[JTR_SD]

i like the fox but does it allow the camera to be used?

I was able to get my Fox pad to work with the camera. I just adjusted the pad up nice and high and wrapped a small Velcro strap around the bottom of the pad to expose the camera.

 

[JTR_SD]

Reviving this thread to post that the Fox pad can work with the third brake light and the camera. Check out how I adjusted it to make it work. As I mentioned above, a little Velcro or something similar right above the camera provides enough clearance for it to work.

 

[RiderDad27]

Reviving this thread to post that the Fox pad can work with the third brake light and the camera. Check out how I adjusted it to make it work. As I mentioned above, a little Velcro or something similar right above the camera provides enough clearance for it to work.

This is how it should look once installed if you want to minimize the damage on the bike.The inner pad needs to be aligned with the top of tailgate.

In your configuration I dont think it is happening

 

[JTR_SD]

This is how it should look once installed if you want to minimize the damage on the bike.The inner pad needs to be aligned with the top of tailgate.

In your configuration I dont think it is happening

The inner pads don't align with the top of the tailgate on my truck the way I have it set up. That said: no damage to any of my bikes. Since the tailgate is so short the frame doesn't interact with the inner pads either way.

Sponsored