Thinkware F70 Dashcam install

[Bombato]

Please advise on the correct wires to use when hardwiring into a 2020 Gladiator Rubicon with factory auxiliary switches. I followed the youtube video for the installation and have the wire down to the center console. Where can I get a constant on hot wire, an accessory on wire, and a good ground location inside the cab? The video uses wires in the cigarette lighter. Please identify the color of the lighter wires to match my request. I am an avid reader of this post and have learned much about my new rig. Thanks for your professional response.

Sponsored

 

[Josh00333]

Under the glove box, take it out, is where the aux wires are bundled up at.

There is a ground behind the panel by the passengers right foot kick panel.

Or you can run a ground to the eng bay, there are ground studs on the driver side mirror of the passenger side. If you have an auto there is a big grommet that’s ez to use accessing the eng bay.


https://www.jeepgladiatorforum.com/forum/threads/aux-switch-wires-interior-passenger-side.29437/

 

[Mr._Bill]

The color coding for the wires is in the Owners Manual. The interior six wire Aux bundle is usually well taped to the harness under the glove box. It took a while for me to locate, they looked like part of the wiring harness.

Sponsored