Tire poke based on offset for Clayton lift

[vonguido]

Anyone have pictures of their JT w/ the Clayton lift and wheels with the backspacing of 4.7 or less, preferably a picture that shows the poke?
I just ordered a set of 17x9 rims from RockTrix with a -12 offset and 4.5 backspacing based on Clayton’s recommendation and want to see what I’m looking at.
I have the 3.5 overland+ lift and will be putting 37x12.50x17 tires on it.

Sponsored

 

[Silverator]

Clayton 2.5 Overland+. -12 offset Method Beadgrips. 35x11.5R17's. A little over an inch and a half of poke. With 12.5's, I'd suspect you will have another 1/2"+. Probably pushing 2". Maybe 1-3/4".

 

[BunkieJeeper75]

Anyone have pictures of their JT w/ the Clayton lift and wheels with the backspacing of 4.7 or less, preferably a picture that shows the poke?
I just ordered a set of 17x9 rims from RockTrix with a -12 offset and 4.5 backspacing based on Clayton’s recommendation and want to see what I’m looking at.
I have the 3.5 overland+ lift and will be putting 37x12.50x17 tires on it.

I have the same lift and size of tires.
My wheels are icon rebound with -6 offset.

 

[RockTrixWheels]

Anyone have pictures of their JT w/ the Clayton lift and wheels with the backspacing of 4.7 or less, preferably a picture that shows the poke?
I just ordered a set of 17x9 rims from RockTrix with a -12 offset and 4.5 backspacing based on Clayton’s recommendation and want to see what I’m looking at.
I have the 3.5 overland+ lift and will be putting 37x12.50x17 tires on it.

Here are so pictures we have of our customers Gladiator with the same wheel sizes that you goto 17x9 -12 with a lift and 37x12.50x17 tires. Please let us know if you have any questions or concerns with your purchase!

 

[Free2roam]

Clayton 2.5 overland lift with Rubicon take off and Icon Rebound Pros -6

 

[Idlethunder]

Clayton 2.5" lift, 37x12.5 Baja Boss ATs on Fuel wheels with -12 offset 4.5" backspacing. I just measured with end of tape on edge of fender. Eyeballing poke with a flashlight, it is right at 3"

 

[Not2Late]

Curious. Does their recomendation take into consideration the already "baked in" .75" of additional backspace on the wider (total of 1.5" wider axles) axles that come with some trim levels?

 

[vonguido]

Curious. Does their recomendation take into consideration the already "baked in" .75" of additional backspace on the wider (total of 1.5" wider axles) axles that come with some trim levels?

Not sure, might be worth a call to Clayton to ask.

Sponsored