Turn assist with tazer

[jrf]

Doesn't look like they've updated the manual yet. It doesn't even have turn assist in it.

Does anyone have a copy of it? Could have swore I saw text about the turn assist on a review so It's got to be somewhere.

Sponsored

 

[Elff]

My Manual does not even say 2022 is supported yet. But obviously it is.
I had turn assist from Day and did not even notice it.

 

[JTR178]

For whatever reason I can’t get my key remaps to stick, so I’m SOL so far.

 

[Gvsukids]

I would love to see someone with a Tazer do this on a Gladiator with a video! I think it would benefit us greatly.

It's amazing. Although, with Trac-loc the inside wheel doesn't hold as well, although I could do a donut on snow in the space of a two lane road.

 

[jrf]

It's amazing.

So is it just available as an option in the key remapping?

 

[Gvsukids]

So is it just available as an option in the key remapping?

Yes.

 

[JTR178]

Can someone give me a step by step on the key remapping? I cannot get it to stay. It always reverts back to winch mode, traction control off, and whatever the other one is.

 

[Chetnik]

I cannot find any info either. I have the latest firmware.. yet I cannot figure out how to remap for turn assist. My cameras also are now blue and do not function... lol

Can someone give me a step by step on the key remapping? I cannot get it to stay. It always reverts back to winch mode, traction control off, and whatever the other one is.

 

[hjdca]

Can someone give me a step by step on the key remapping? I cannot get it to stay. It always reverts back to winch mode, traction control off, and whatever the other one is.

You have to be in the right "radio display" on your main instrument screen. Many times this screen is changed automatically if you air down and it is telling you your tires are low. Once you get to the right "radio display" on your main screen it is easy - even while the engine is running, you just push the button on the left of your steering wheel and scroll through your options on each of the three cruise control buttons while pushing them -- until you see the one you like and let go.
For example, I 4wheel a lot and I have a stick, so, I map the "rock crawl" button to my lower cruise control button. I also map the sway disconnect to the right cruise button and the "turn assist" to the top cruise button. You can only map three commands to three buttons. I also like to map the "winch mode" to 1500 rpm and put that on when I air up -- it give more juice to my air compressor; and I also used it once when I winched a guy in our party. You can switch the mapping to the buttons on the fly depending on what you are doing at the time.

 

[glassjawkid32]

Did the reboot process speed up with the tazer? I just adjusted my tire size and the reboot only takes 35 seconds but I keep reading that a full 2.5 minute reboot is necessary

 

[glassjawkid32]

Also wondering if this will put strain on those of us with LSD?

 

[dcmdon]

You have to be in the right "radio display" on your main instrument screen. Many times this screen is changed automatically if you air down and it is telling you your tires are low. Once you get to the right "radio display" on your main screen it is easy - even while the engine is running, you just push the button on the left of your steering wheel and scroll through your options on each of the three cruise control buttons while pushing them -- until you see the one you like and let go.
For example, I 4wheel a lot and I have a stick, so, I map the "rock crawl" button to my lower cruise control button. I also map the sway disconnect to the right cruise button and the "turn assist" to the top cruise button. You can only map three commands to three buttons. I also like to map the "winch mode" to 1500 rpm and put that on when I air up -- it give more juice to my air compressor; and I also used it once when I winched a guy in our party. You can switch the mapping to the buttons on the fly depending on what you are doing at the time.

So you hold down the left steering wheel button like you normally do to get into the tazer menu.

Then rather than pushing cruise cancel button to go into the menus, you push up, resume, or down? That is where you set what each shortcut maps to?

Once you've mapped it, how do yyou trigger the function? Do you need to be in the "radio" menu to trigger the function?

Thanks. Sorry for all the questions. I'm trying to figure this out and there doesn't seem to be any documentaitons on mapping buttons. If there is, a link would be great. But its not in the online instructions.

 

[hjdca]

So you hold down the left steering wheel button like you normally do to get into the tazer menu.

Then rather than pushing cruise cancel button to go into the menus, you push up, resume, or down? That is where you set what each shortcut maps to?

Once you've mapped it, how do yyou trigger the function? Do you need to be in the "radio" menu to trigger the function?

Thanks. Sorry for all the questions. I'm trying to figure this out and there doesn't seem to be any documentaitons on mapping buttons. If there is, a link would be great. But its not in the online instructions.

It is part of "Button remap" or "hotkeys" in the directions.

1. Yes, you need to be in the radio menu to trigger it, and you will see it light up on the dash.
2. Yes, you push the left button, hold it down, and then push the cruise control buttons to scroll through the options. Once you find the one you like, let go. Then, if you press the activated cruise control button without the left button pressed, it will activate.

 

[GulfcoastJeep]

So just tested it out. If you have a LSD turn assist is pretty much unusable. Not by the fault of the tazer just the mechanics of a LSD will not allow one wheel to lock up completely.

@glassjawkid32

 

[JTR178]

Yeah, bumping an old thread. Finally got the chance to use turn assist today. This might be one of the best features to come or the Tazer. I was making tighter turns on the trails than 4 door Wranglers.

Sponsored