AllMoparParts.com
Summit Sponsor (Level 3)
- Thread starter
- #2,071
CorrectAnd just to make sure here, I'd need to order 2 front rotors and 2 rears as they are sold as singles?
Sponsored
CorrectAnd just to make sure here, I'd need to order 2 front rotors and 2 rears as they are sold as singles?
![]()
Benny, I was cleaning up my brand new Mojave, and found this parts bag under the seat. Can you tell me what this used for? I tried to look on your site, but no luck.
The curiosity is killing me!
Benny,Hi Chris,
These can be found in our repair parts section, As they are becoming a "mod" we will add them to our accessory section soon.
Here are links
https://parts.allmoparparts.com/oem-parts/mopar-front-coil-spring-68607513ab
https://parts.allmoparparts.com/oem-parts/mopar-rear-coil-spring-68607529aa
Availability on the fronts is not great, Theres only 1 in mopar's warehouse. I can only estimate a few weeks to get more in.
Please let me know if you have any other questions.
Thank you,
- Benny
They are the same for Left and RightBenny,
Clicking on these links, it says left side for front and rear. Are there right side part numbers? Are these numbers for the plastic or steel bumper version of the Mojave X? Or the same for both? Which are different from the Rubicon and Rubicon X.
Thanks.
I just bought a JT soft top but was missing all the fasteners. Are the above the ones I'll need (besides re-using existing screws where applicable)? Is it the same quantities (noticed this was asked for a JL)?Hi Joe,
Here are links and Qty's needed
X8
https://parts.allmoparparts.com/oem-parts/mopar-screw-and-washer-soft-top-door-surround-6512163aa
X10
https://parts.allmoparparts.com/oem-parts/mopar-wrangler-jl-hard-top-to-body-bolt-6512235aa
X4
https://parts.allmoparparts.com/oem-parts/mopar-washer-head-screw-68466093aa
When looking at the softtop install sheet note that some hardware is not available such as T & U
https://www.allmoparparts.com/docs/82215614.pdf
Please let me know if you have any other questions.
Thanks,
-Benny
Hi Alex,I just bought a JT soft top but was missing all the fasteners. Are the above the ones I'll need (besides re-using existing screws where applicable)? Is it the same quantities (noticed this was asked for a JL)?