What can we do for you?

[Hootbro]

It's odd that Mojave uses the same part # for the left and right... other Gladiator models have 4 unique springs. We sure on these part #s?

I recently picked up a set of springs from a 2023 Rubicon JT diesel model and the L/R sets were both the same part number. I found it odd also.

Sponsored

 

[ecidiego]

I recently picked up a set of springs from a 2023 Rubicon JT diesel model and the L/R sets were both the same part number. I found it odd also.

I just saw you have a new Gladiator - #4?

 

[Hootbro]

I just saw you have a new Gladiator - #4?

Yeah, #4. Over built my last one from being a practical daily and went with a base sport trying to keep this one toned down. That is the plan anyways.

 

[AllMoparParts.com]

It's odd that Mojave uses the same part # for the left and right... other Gladiator models have 4 unique springs. We sure on these part #s?

Correct on the Mojave's but I have seen cases where L/R are the same for other trims as well, It's not common though.

- Benny

 

[Reddout99]

Benny, I am looking for a 2024 Grill Assembly without the camera or lock opening to swap in my 2021 JT.
Do you have a price on these and can they be ordered already painted?

Thanks, Bob

 

[AllMoparParts.com]

Benny, I am looking for a 2024 Grill Assembly without the camera or lock opening to swap in my 2021 JT.
Do you have a price on these and can they be ordered already painted?

Thanks, Bob

Hi Bob,
I am sorry but these are not available pre-painted from Jeep. Here is a link to the grille https://www.allmoparparts.com/sku/jljtrubi20agrille.html

I will send you a code you can use,
- Benny

 

[Reddout99]

Hi Bob,
I am sorry but these are not available pre-painted from Jeep. Here is a link to the grille https://www.allmoparparts.com/sku/jljtrubi20agrille.html

I will send you a code you can use,
- Benny

Thank you

 

[gravely]

Hello benny,

Do you have part numbers for the Mojave front, rear springs and lower control arms?

 

[AllMoparParts.com]

Hello benny,

Do you have part numbers for the Mojave front, rear springs and lower control arms?

Hi Jeremy,
Springs are not standardized, I would like to check this via your VIN please

- Benny

 

[gravely]

Hi Jeremy,
Springs are not standardized, I would like to check this via your VIN please

- Benny

Well my gladly is a willys so not sure the Vin would help. My goal is a bit of lift and a good ride quality, but primarily to be more level

 

[AllMoparParts.com]

Well my gladly is a willys so not sure the Vin would help. My goal is a bit of lift and a good ride quality, but primarily to be more level

Ok, With or without Steel bumpers?

 

[gravely]

Ok, With or without Steel bumpers?

Without as of right now but looking for used. Just a note I'm not trying to build a Mojave just want the ride quality.

 

[Splenda]

Without as of right now but looking for used. Just a note I'm not trying to build a Mojave just want the ride quality.

I think he was trying to find out if you were going to run plastic or steel bumpers because the Mojave has plastic bumpers and the Mojave X has steel bumpers, so the Mojave X has slightly stiffer springs.

 

[gravely]

I think he was trying to find out if you were going to run plastic or steel bumpers because the Mojave has plastic bumpers and the Mojave X has steel bumpers, so the Mojave X has slightly stiffer springs.

Ah I see sorry I did not know that. Ya probably just go with the plastic as that what I have.

 

[Splenda]

Ah I see sorry I did not know that. Ya probably just go with the plastic as that what I have.

In all honesty, I doubt there is much difference in the weight of the plastic bumper and the stock steel bumper. I know the stock plastic bumper weighs about 65 pounds, and the stock steel bumper does not have the winch plate in it from the factory.

Sponsored