What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Deadpool392]

Answering for mine, it wasn't too bad at all. You just want to take your time and get everything right. There's a horrific Youtube video where somebody wobbles out the holes to get things to line up, because he didn't get it right the first time. Don't be that guy.
Instructions here

Thanks, I did read the instructions, before I even bought it. Did you have a 42mm socket already or did you have to buy one? Or did you use something else for the pitman arm nut?

Sponsored

 

[Lunentucker]

Thanks, I did read the instructions, before I even bought it. Did you have a 42mm socket already or did you have to buy one? Or did you use something else for the pitman arm nut?

42mm is pretty rare and expensive. This works fine.
https://www.amazon.com/gp/product/B006MPBYXO/

 

[Palmetto57]

I put a 3.5” Skyjacker lift on my 2023 gladiator and put 37” Ridge grapplers on

 

[JAsh1967]

So, does it still count as what *I* did to my Gladiator if I paid someone to do it for me?

Before:

After:

Put on a Metalcloak bumper with the winch guard and skidplate, mid-width, and a Harbor Freight Badlands 12K. I think I need wider tires now. ?

 

[Gatorac]

I put a 3.5” Skyjacker lift on my 2023 gladiator and put 37” Ridge grapplers on

That looks pretty darn sweet. Nice work.

 

[jeepers29]

I put some Air Ride helper bags on back of my Mojave. Good for 1000lbs payload leveling. I max out payload pretty often [1100lbs on my Mojave] with my travel trailer an gear. As difference between Mojave an Max (relative to payload) Tow is only rear spring rate to get 1700lbs vs. 1100lbs I am way more confident at my 1100lb max now (as I have 1700lbs spring rate available now with up to 35 psi in bag option). $70 canadian was a no brainer for the entire kit. Install of bags in -10c tougher then internet said as bags were a bit stiff to try and slip into spring at that temp, my fault there. Plummed manual valve into gas door area (most in bumper, but in winter bumper is a snowball so i wanted a protected area, not in box, as it is full when i need at valve). Two bags are connected for now, if i find better to have them seperate i'll replumb. Finding 5psi minimum ads a little more spring rate then I was wanting unladen, but they are breaking in.
When trailer season returns will have to get some pics up. These are pre bag with a bit of squat trailered up...

Which kit # did you get for your mojave?

 

[Boxr4]

Which kit # did you get for your mojave?

1000 . Only kit I saw for JT.

 

[jeepers29]

1000 . Only kit I saw for JT.

Thank you.

 

[Todd091870]

Installed tonneau cover

 

[MSFTMatt]

Use a 6 mil x 1.0 tap - that worked for me.

Do you have aftermarket spray in liner or factory?

 

[MSFTMatt]

Ordered Clayton 2.5 Overland with the HD rear springs. I'll let the coffers refill a bit before ordering shocks.

 

[John18A]

Debadged, washed, and front license plate holder. Love this truck!

 

[JCappy]

So today was arts and crafts day since I was off work and a little bored. Since I don't have anything white on my truck, I decided to paint my new light grills to somewhat match the orange in my Mojave. Pretty happy with the outcome.

 

[Blitzinger]

Got a truck bed cap and added a rack

 

[WILDHOBO]

42mm is pretty rare and expensive. This works fine.
https://www.amazon.com/gp/product/B006MPBYXO/

I have one in the Jeep for the pitman nut. It was cheaper than the one you linked actually.
https://a.co/d/h8dvsyB

Sponsored