What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[WILDHOBO]

Rear Seat Delete Deck -

I have no clue what I'm doing -

Also saw a bunny -

Looks like you’re doing a great job.

Sponsored

 

[SnazzGlad]

How many ounces per?

40’s LOL J/K Just cans of water(BUSCH LIGHT)

 

[WILDHOBO]

40’s LOL J/K Just cans of water(BUSCH LIGHT)

I like 16’s.

 

[ShadowsPapa]

40’s LOL J/K Just cans of water(BUSCH LIGHT)

Red Green Show
Possum Lodge word game.
Red had to get Dalton to say the word "water".
Red gives the clue - "this is something you drink a lot of"
Dalton responds - beer!
Red says - no, this has no flavor
Dalton responds - oh, American beer!

 

[OffAxis2021]

Finally got a chance to put back on its warmer weather/summer things. Tires/Wheels and hood/grill covers. Just don’t call it an “Bra!” Lol. Also added just a little “bling” with the Mopar pedal covers.

Another week and the roof/doors should be off for the remainder of the summer season - Labor Day-ish.

Cold/Winter months;
Mickey Thompson Baja Boss A/T
255/85R17 (34.6x10x17) on base Mojave wheels.

Warm/Summer months;
Kenda Klever R/T 35x10.5x17
Method 315 17x8.5 & 0 offset.

Bling Bling.
Mopar.

Not quite there yet… come on already!!
Sec_C AF. Hah!

 

[Gatorized]

My wife wanted a receiver on her car for bike racks. Not a Jeep, but what a nice easy install. I’ve not done a 1.5 hour car project I don’t think ever. No clips. Just screws and bolts. No drilling, no hardware even needed. The only “part” I used was some orange thread locker.

the EcoHitch is a little more complicated to install than the typical aftermarket hitch, but it retains a whole lot more ground clearance.

 

[WILDHOBO]

the EcoHitch is a little more complicated to install than the typical aftermarket hitch, but it retains a whole lot more ground clearance.

I’ve had them on other vehicles as well in the past. I thought it would be bad being a Volvo. It was the opposite. No clips. Just bolts and screws. Very well designed. And less than a third of the price to buy a receiver from Volvo.

 

[Advntrbound]

Installed the Redarc brake controller, re-wired the GMRS radio.

 

[Rusty PW]

Been a busy day. Did an oil change, fuel filter change, grease all the Johnny Joints and steering linkage. Sending oil sample to Blackstone Labs. Rotated the tires. The tire jack I got from Summit Racing is paying for its self.

 

[Rusty PW]

Installed the Rock Jock frame plugs. The ones in the frame were easy to install. Took a razor knife and cleaned the hole. Then used a rubber mallet to tap into place. The plugs for the cross over tube were a PITA because the holes are not exactly round. They are kind of egg shaped from welding. Had to use a die grinder with a burr bit to round out the holes.

 

[WILDHOBO]

Been a busy day. Did an oil change, fuel filter change, grease all the Johnny Joints and steering linkage. Sending oil sample to Blackstone Labs. Rotated the tires. The tire jack I got from Summit Racing is paying for its self.

One of those tire jacks is in my future. Not immediate, but at some point. Thanks for the recommendation

 

[Rusty PW]

Finished installing the brackets to hold my shovel and axe.

 

[Rusty PW]

Installed the Fox ATS steering stabilizer.

 

[WILDHOBO]

Installed the Fox ATS steering stabilizer.

I loved the steering feel with mine, but for the life of me couldn’t figure out clearances.

 

[WILDHOBO]

Installed the Fox ATS steering stabilizer.

If those red, what look like red painted rock hard, Lca skids stay red, I’ll be so impressed. mine are now scratch colored.

Sponsored