What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Alabama Mud Machine]

Upgraded with Teraflex 2.5" lift/shocks/steering stabilizer, Smittybilt 12K winch, KC HiLite Pro6 lights, driving lights, Rhino wheels and 37" Nitto tires...other than that not much

I like the old school KC's instead of a light bar. Got a part number for those low-pro models, and the mount? I think I want to go that route on mine! I dig the old school style.

Sponsored

 

[Alabama Mud Machine]

Thanks Moab! Once we get to move out to Colorado (up in the mountains above Boulder) in a couple months, a rack, RRT, refer/freezer, etc., will start Overlanding and one on the bucket list is Moab!

Colorado huh? Why do you need a "reefer freezer"? You can go buy it fresh on any corner or dispensary.

Bad attempt at a joke, I know what a reefer/freezer is. Just sounded funnier in my head.

 

[steffen707]

Upgraded with Teraflex 2.5" lift/shocks/steering stabilizer, Smittybilt 12K winch, KC HiLite Pro6 lights, driving lights, Rhino wheels and 37" Nitto tires...other than that not much

are those stock rubicon decals on the hood with the red?

 

[Alabama Mud Machine]

are those stock rubicon decals on the hood with the red?

Looks like it to me.

Here's a pic of mine...It as the red-outlined Rubicon decals, too. It even has the red "Trail Rated" sticker and red outlined "Jeep" logo to match the red tow hooks front & rear. And the little red Jeeps on the stock wheels.

 

[steffen707]

Looks like it to me.

Here's a pic of mine...It as the red-outlined Rubicon decals, too. It even has the red "Trail Rated" sticker and red outlined "Jeep" logo to match the red tow hooks front & rear. And the little red Jeeps on the stock wheels.

the black part on yours are very black. on the other one they look kind of gray. Maybe its just the light shining on it.

 

[Sespe]

Daystar 1.5" front level, .75" rear. Finally installed after much trials.

 

[sass JT]

Upgraded with Teraflex 2.5" lift/shocks/steering stabilizer, Smittybilt 12K winch, KC HiLite Pro6 lights, driving lights, Rhino wheels and 37" Nitto tires...other than that not much

how are you liking your falcon shocks?

 

[msujedi]

I leveled my JT ... by loading the bed with all of the contents of my daughter's college dorm! ... loveseat - pullout bed, microwave, 2 sets of shelves, school supplies, lamp, dirty clothes, clean clothes, dirty clothes, dirty clothes.

 

[khokhonutt]

Link for these mirrors?

I'm pretty sure they are the Carolina Metal Masters Mirrors: https://www.carolinametalmasters.co...ucts/jt-side-mirrors-with-ball-mount-solution

 

[DawgBox]

Now this is what I’m talking about!
Very nice. Great colour with the rims & lites!
Enjoy man.

I like the old school KC's instead of a light bar. Got a part number for those low-pro models, and the mount? I think I want to go that route on mine! I dig the old school style.

Hi Alabama Mud Machine, The lights on the mount is: https://www.kchilites.com/light-type/led/pro6-leds/gravity-led-pro6-single-pair-pack.html and the mount is from Mopar: https://www.quadratec.com/p/mopar/grille-winch-guard-jeep-wrangler-jl-82215351. The light bar and supports are: https://www.kchilites.com/light-typ...-pro6-led-light-bar-50-jeep-jl-jt-8-ring.html. I went with the Smittybilt x2o 12k winch with synthetic rope and remote https://www.quadratec.com/p/smittybilt/x2o-12-gen2-winch-synthetic-98512. To control DawgBox I went with Teraflex (part numbers below)

Teraflex 2012033 2.5 LIFT W/FALCON SHOCKS
Teraflex 1417590 FRONT LOWER CONTROL ARMS
Teraflex 1416500 REAR LOWER CONTROL ARMS
Teraflex 090222110000 SINGLE ADJ. STABILIZER

Got 5 of the Black Rhino Armory wheels (17x9.5) in desert sand and prayed the color was close to Gobi...I think it turned out great! The tires are Nitto 37X12.50X17 Ridge Grapplers and we were able to mount the spare underneath without airing down! Unfortunately, it is sitting at the shop awaiting for alignment...I can't pick it up until Monday...I must have patience!

 

[DawgBox]

how are you liking your falcon shocks?

I'll let you know after I pick it up Monday...I'm stuck without it as the dude doing the alignment went home early!

 

[Texops]

Today i added the Air up down regulator system, next I’ll run the lines to the arb tank underneath & then to each wheel well . So hooked up all 4 tires i can air them down all at once to the exact same pressure. And air all up using the regulated pressure i want. I didn’t want to put anything under the hood because it gets so freakin hot under there in the summer. So it’s rigged up under my passenger seat.

 

[graydiator]

Even though they are available on the Internet on many of the popular sites my dealer was insistent that all black weather mats were not available because they did not show up in the system however, after almost two months of arguing with the parts guy at my dealer (because they were included in my deal) about all black all weather mats (not the red trimmed ones) being available the manager Anthony @sansoneautonj made my day when he called today to tell me that my mats were in.

Attached is a photo the part number of these over engineered beauties should anyone else come across a similar situation at their dealer.

 

[Jim_n_Tx]

Ready for weather and out of "stay home" status

 

[Hoss63]

Made A lift for removing my hard top, and removed my hard top. Will install soft top tomorrow ran out of time today.

Sponsored