Wheels?! Wheels?! Wheels?!

[dangerousone]

Bronze Dirty Life DT1 with 37” Nitto Ridge Grapplers

Sponsored

 

[OrangeCJ]

Bronze Dirty Life DT1 with 37” Nitto Ridge Grappler

Any chance you have a side pic to see how far they stick out? I was thinking about these wheels!

 

[hjdca]

Newly released Method 703 "bead Grip" rims. Only one size for the Jeep - 0 offset, hub centric. They are light and can run extra low air pressure without popping a bead. The center cap has a mountain range on it to identify the "Bead Grip". 37 inch Goodyear MTRs mounted on the wheels. A nice light combo with really low air pressure capabilities. Pics below:

 

[Canadian GP]

Newly released Method 703 "bead Grip" rims. Only one size for the Jeep - 0 offset, hub centric. They are light and can run extra low air pressure without popping a bead. The center cap has a mountain range on it to identify the "Bead Grip". 37 inch Goodyear MTRs mounted on the wheels. A nice light combo with really low air pressure capabilities. Pics below:

Good choice, I went with the bronze version along with the optional red lettering on the caps.

 

[unsocbl]

Good choice, I went with the bronze version along with the optional red lettering on the caps.

That bronze and blue combo is gorgeous!

 

[XraytecH]

https://www.customwheeloffset.com/search-wheel-offset-gallery

Enter Year/Make/Model and you'll find other Gladiator owners with wheel and tire specs with what suspension they are running and what other modifications they needed to do.

Here's my wheel and tires with no lift.

Goodyear DuraTracs 35x12.5r17
Fuel Off Road, Beast 17x9 +01 Offset

 

[dangerousone]

Any chance you have a side pic to see how far they stick out? I was thinking about these wheels!

I don't but can grab one in the next day or so.

 

[blau iii]

Good choice, I went with the bronze version along with the optional red lettering on the caps.

How's the poke with these? I'm stuck between these and the AEV Pintler.

 

[Canadian GP]

How's the poke with these? I'm stuck between these and the AEV Pintler.

 

[relayer4u]

The Method 703 is going to be available in a +25 version supposedly around March.

 

[kaeo_15]

KMC KM100 Sync in Satin Black with Gray tint - 17x9 +18 (5.71 backspace). Very similar backspacing to AEV wheels, which I believe are 5.73. Don’t believe I’ve seen a set on the forum yet.

 

[blau iii]

The Method 703 is going to be available in a +25 version supposedly around March.

Interesting. I really like their wheels. Any issues with aftermarket lug nuts they require?

 

[DrBD]

Had the same dilemma. Went ahead with my 35's with new 17" rims, 0 offset. Made sure rim was appropriate for the tire. Factory rims are a little narrow.

White lettering is where it's at. Can't wait to run down my meats lol

 

[relayer4u]

Interesting. I really like their wheels. Any issues with aftermarket lug nuts they require?

I used the McGard spline drives on my JL with Method 313s and will be using them agin on my JT's 313s. Any of the narrow seat spline drives should work, Method even sells their own sets.

 

[Achenxx8]

KMC KM100 Sync in Satin Black with Gray tint - 17x9 +18 (5.71 backspace). Very similar backspacing to AEV wheels, which I believe are 5.73. Don’t believe I’ve seen a set on the forum yet.

Nice looking wheels man! What tire size do you have on? Can you take a picture of how much the wheel is sticking out the fender? Thanks!

Sponsored