Wolfbox Wide-Angle Convex Side Mirrors (Pair) from $69.99. Extra Discount Code Included!

[RudeJeepin]

I’m surprised no one has offered a spacer adapter to push the mirrors out an inch or so.

Are you meaning to add a spacer between the mirror mount and the door? Where the red arrow is pointing?

I've been talking about it with my son. I just need to get an extra mirror for modeling.

Sponsored

 

[Vtur]

Are you meaning to add a spacer between the mirror mount and the door? Where the red arrow is pointing?

I've been talking about it with my son. I just need to get an extra mirror for modeling.

Yes.

 

[BambiBasher]

@BambiBasher

Checked out your pics of the side mirror install. Can you adjust the side mirror(s) so you don't get so much of your JT in the view?

Preferred is like in the pics below.

No I can’t move mine at all anymore. I might try to mess with it a little more but they are set at the max travel limit.

 

[MSFTMatt]

Mine are getting delivered today. Any update on the trick/tip to make the drivers side go out farther? Or really any tips for install.

 

[biplaneguy]

@JTdiRtyD

I just sent you a private message telling you about a tweak that will undoubtedly fix this issue. I know the simple tweak works on the Suma's.

IF the tweak works for your Wolfbox offering, let other fellow Wolfbox mirror owner's here know about it.

I'm confident the simple tweak will work for you...

I have been using the tweak for years and many JL owner's that I told the tweak about use the tweak successfully.

Why don't you simply post it here?

 

[biplaneguy]

It appears the blue tinted mirrors are sold out. @WOLFBOX , any info on when they will be available?

 

[WOLFBOX]

It appears the blue tinted mirrors are sold out. @WOLFBOX , any info on when they will be available?

Yes, it's sold out. Thanks for the supports from forum members!
It'll be available again one month later.
Cheers!

 

[MSFTMatt]

@JTdiRtyD

I just sent you a private message telling you about a tweak that will undoubtedly fix this issue. I know the simple tweak works on the Suma's.

IF the tweak works for your Wolfbox offering, let other fellow Wolfbox mirror owner's here know about it.

I'm confident the simple tweak will work for you...

I have been using the tweak for years and many JL owner's that I told the tweak about use the tweak successfully.

So what is this simple tweak? The people want to know

 

[drexotic]

I installed my tinted mirrors today. I think they're great. I can now see a lane and a half on either side of my jeep and further at the distance of the end of my trailer. With the OEM mirrors I barely could see the margins of the trailer.
This is my second WolfBox product that I enthusiastically endorse!

 

[Cryin'Bob]

@WOLFBOX

Any word on the BSM lights on these mirrors? Still looking to purchase!

Bob

 

[WOLFBOX]

@WOLFBOX

Any word on the BSM lights on these mirrors? Still looking to purchase!

Bob

Thanks for your patience. We're doing test now. We'll list it as long as the test result is good.

 

[JTdiRtyD]

@WOLFBOX

One of the more common "complaints" we have here is you can't adjust the mirrors outwards enough, and when adjusted as far out as you can you're still seeing too much of the rear doors. This leaves a some to be desired when it comes to the field of view that you're getting. Is it possible the make the glass angled a little more outwards on the mounting plate so you don't have to have the mirror adjusted all the way out once installed?

Not sure if I'm explaining this correctly or clearly.

 

[MSFTMatt]

I spoke with @Rhinebeck01 this AM on the phone and he talked me through how to do the trick to make you see less of your truck and more of the road. It’s fast and stupid easy. I only needed to do my drivers side. I’ll post the pics/vid below.
Basically the mirror housing is on a spring so you pull the whole housing away from the truck which creates a gap between the housing and the pedestal. Using an approximately 1.5” piece of zip-tie you place it in the gap leaving a small tail so you can remove it if you don’t like it. Because I have an IQ of 48 the pics/vid below may not be in order but there is a before, after, size zip-tie I used to cut down and how I moved the housing to create the gap.
Feel free to hit me up with questions but the credit goes to @Rhinebeck01.

 

[WOLFBOX]

@WOLFBOX

One of the more common "complaints" we have here is you can't adjust the mirrors outwards enough, and when adjusted as far out as you can you're still seeing too much of the rear doors. This leaves a some to be desired when it comes to the field of view that you're getting. Is it possible the make the glass angled a little more outwards on the mounting plate so you don't have to have the mirror adjusted all the way out once installed?

Not sure if I'm explaining this correctly or clearly.

I got it. Thanks, pal. Duely noted.

 

[WOLFBOX]

@WOLFBOX

One of the more common "complaints" we have here is you can't adjust the mirrors outwards enough, and when adjusted as far out as you can you're still seeing too much of the rear doors. This leaves a some to be desired when it comes to the field of view that you're getting. Is it possible the make the glass angled a little more outwards on the mounting plate so you don't have to have the mirror adjusted all the way out once installed?

Not sure if I'm explaining this correctly or clearly.

That adjustment angle is limited to the factory adjustment part in the housing. Currently, we're only offering the mirrors, not the whole assembly.

Sponsored