Towing help/ question

[RVCA_ZR]

I have what appears to be a tow package on my jeep. It’s a 80th anniversary but I can’t find the window sticker so can’t verify. If it is in fact a tow package, any links or guidance on getting a receiver mount for it? I want to mount my 2” bike rack for a upcoming trip. Any help would be great, thanks!

Sponsored

 

[Gvsukids]

I have what appears to be a tow package on my jeep. It’s a 80th anniversary but I can’t find the window sticker so can’t verify. If it is in fact a tow package, any links or guidance on getting a receiver mount for it? I want to mount my 2” bike rack for a upcoming trip. Any help would be great, thanks!

Not the tow package.
https://www.jeepgladiatorforum.com/...big-deal-to-add-aftermarket.28518/post-462472

 

[rconkin]

Here's a link where you can lookup your window sticker.
https://windowstickerlookup.com/

 

[WILDHOBO]

Not the tow package.
https://www.jeepgladiatorforum.com/...big-deal-to-add-aftermarket.28518/post-462472

I’m not sure I agree. I get that the frame mount usually exists. But I haven’t seen one with the electrical. Was this used? I’m thinking the previous owner removed the receiver for ground clearance reasons.

 

[redline61]

You are fine. Add this little part, take the time to pull your bumper so you don't have to cut a hole, and have fun. This is more than adequate for a bike rack. I use it to tow a 2,000lbs camper. You have a factory tow package of sorts, it just doesn't have a receiver. The factory intent is you would cut a small hole in the plastic bumper, and add a ball to the bumper/hitch. You still have full lights, and everything you need for light use.

https://www.quadratec.com/p/curt/class-iii-2-inch-receiver-hitch-gladiator-jt-13434

 

[RVCA_ZR]

I’m not sure I agree. I get that the frame mount usually exists. But I haven’t seen one with the electrical. Was this used? I’m thinking the previous owner removed the receiver for ground clearance reasons.

Nope, brand new in Nov 20’. I have never need to tow or use a hitch on this truck so never even looked

 

[RVCA_ZR]

Here's a link where you can lookup your window sticker.
https://windowstickerlookup.com/

Thanks! That’s super helpful

 

[WILDHOBO]

Nope, brand new in Nov 20’. I have never need to tow or use a hitch on this truck so never even looked

Interesting. Weird that they’d put electrical, but I’d be happy about it. Add the receiver and you’re good to go with a 4,500 towing capacity. Bike racks are a non issue.

 

[RVCA_ZR]

Guessing I don’t have the max tow otherwise it would say it but is this the normal tow setup on all gladiators?

 

[WILDHOBO]

Guessing I don’t have the max tow otherwise it would say it but is this the normal tow setup on all gladiators?

Can you post the entire sticker?

 

[chrismeece74]

If you had a max tow it will be listed under optional equipment

 

[RVCA_ZR]

Can you post the entire sticker?

 

[WILDHOBO]

Thanks. No factory towing and definitely no max tow package. But you can still add the receiver in an hour or two and safely have a rating of 4,500. But I’d try to stay under 3,500.

 

[MoxiesDad]

Trailer-Tow Package is listed under optional equipment. It lists a class IV receiver hitch and trailer-hitch zoom on my window sticker.

 

[RVCA_ZR]

You are fine. Add this little part, take the time to pull your bumper so you don't have to cut a hole, and have fun. This is more than adequate for a bike rack. I use it to tow a 2,000lbs camper. You have a factory tow package of sorts, it just doesn't have a receiver. The factory intent is you would cut a small hole in the plastic bumper, and add a ball to the bumper/hitch. You still have full lights, and everything you need for light use.

https://www.quadratec.com/p/curt/class-iii-2-inch-receiver-hitch-gladiator-jt-13434

Thanks for the product #, ended up ordering it right now on Amazon for $118 shipped!

Sponsored