2021 Mojave and steering stabilizer benefits

[yoda13]

We may not be talking about the same one, actually, this is the one I ordered...

ahh yeah I was referring to the ATS.

sorry:/

Sponsored

 

[Mojave2021]

We may not be talking about the same one, actually, this is the one I ordered...

sorry:/

No problem. Curious how that one works out for you.

 

[yoda13]

as

No problem. Curious how that one works out for you.

truthfully, I bought it to help with wandering. However, my wandering is 50-60 percent better after I changed to my 35s and put the pressure in them that’s on the door sticker. I might not have bought it had I been patient and waited until I had purchased tires...

 

[mellendic]

When on a firmer setting does the steering wheel return to center right on its own still? I had heard the Teraflex Nexus 2.2 adjustable doesn’t return to center on the firm setting but I wasn’t sure about the Fox ATS.

Mine does just fine, Iam running 18/25 on the highway for normal driving and around town, no issues at all

 

[notoriousms33]

Mine does just fine, Iam running 18/25 on the highway for normal driving and around town, no issues at all

Anybody know if this is the same part number mentioned above?

 

[svc707]

Anybody know if this is the same part number mentioned above?

I ordered the jk model to relocate up and over. Beauty of Amazon, hassle free return to the ups store down the street. I’ve been looking and email trying to confirm with teraflex but no replies ?‍

 

[notoriousms33]

I ordered the jk model to relocate up and over. Beauty of Amazon, hassle free return to the ups store down the street. I’ve been looking and email trying to confirm with teraflex but no replies ?‍

totally right fitment.They also told me you need to order the bolt from mopar for final install mopar part #6510774AA

 

[svc707]

totally right fitment.They also told me you need to order the bolt from mopar for final install mopar part #6510774AA

The one you ordered is correct for oem fitment since it still uses the JL/JT axle bracket. To relocate the one you ordered , you’ll also need to order a new clamshell mount. Mine should be here today. I’ll send picture if it had everything needed for the simple bolt on/relocate.

 

[Minty JL]

I went with this one. I caught it on sale for $330 back in September.

 

[MOJTAVE]

totally right fitment.They also told me you need to order the bolt from mopar for final install mopar part #6510774AA

Make sure you buy this before install. The cost is between $3-$5. You can reuse the old nut. But if you want a new nut they are over $20 each(!).

 

[svc707]

here’s the correct one to order which will relocate the stabilizer up and over. I prefer the ease of adjustment too.

 

[notoriousms33]

I went with this one. I caught it on sale for $330 back in September.

This is the one with the 24 clicks? Easy install?

 

[svc707]

No need to buy additional hardware. Works with the metalcloak relocation bracket too. Otherwise, use the supplied new trackbar bolt. Even on the soft setting it almost eliminated the side to side play in the steering wheel. My factory one I can feel the dead spot in the center and you can hear the air in it just by pushing it in and out at the dead spot.
(Sorry about the yellow tone of picture. Diode dynamics lights are kind of bright ?)

 

[notoriousms33]

Make sure you buy this before install. The cost is between $3-$5. You can reuse the old nut. But if you want a new nut they are over $20 each(!).

[/QUOTE

do you have the part number to this bolt

 

[MOJTAVE]

6510774AA

Sponsored