Brand New VRS Bed Rack System by KB Voodoo! (photo heavy)

[techbrojoe]

Ugh this is what I've been looking for I wish you pre-announced it earlier this year. Just finished installing a very expensive mid-height rack after replacing my RLD topper, but I've already been designing mods for it like this: lower storage bars about an inch above the bed rails, integrated bedside storage, etc. Damn you, thank you.

Sponsored

 

[CdnGriff]

All of our racks that say "for BAK Revolver X4S" will also work with your Roll'n Lock cover.

https://www.kbvoodoo.com/vrs-overlanding-racks-jeep#gladiator-aluminum-bak

Will they work with the Mopar soft tonneau?

 

[KB Voodoo]

Will they work with the Mopar soft tonneau?

At this time the VRS is not compatible with the MOPAR cover. The reason is that the cover is too wide to fit within the Voodoo Rails.

When designing the system, we wanted the Voodoo Rail to be flush to the outside of the bed sides, this meant that some covers would be too wide.

We may make a wider Voodoo Rail for wider covers. If we do, it will overhang the bed sides and it won't be as aesthetically pleasing, but it may be worth it for the additional functionality.

On the JT, a Voodoo Rail wide enough for the MOPAR cover would overhang the bed side by 1 inch. If anybody has any opinions about the look of that, feel free to chime in!!

 

[KB Voodoo]

Ugh this is what I've been looking for I wish you pre-announced it earlier this year. Just finished installing a very expensive mid-height rack after replacing my RLD topper, but I've already been designing mods for it like this: lower storage bars about an inch above the bed rails, integrated bedside storage, etc. Damn you, thank you.

Sorry about that ?

 

[Tank43]

Terrific. I just installed the BAK Revolver X4S cover and have been looking for something compatible that will allow me to still roll up the cover when needed for access and have gear stored above on either a crossbar or full rack. And thank you for appreciating our service members with a discount.

 

[bqueso]

I’m really interested in this rack, but I want to make sure I’m understanding.

Which tonneau cover does it fit without issue?

I currently have only the factory rhino liner/whatever it is without a cover but considering the lack of inside space a cover is necessary for me

 

[KB Voodoo]

Terrific. I just installed the BAK Revolver X4S cover and have been looking for something compatible that will allow me to still roll up the cover when needed for access and have gear stored above on either a crossbar or full rack. And thank you for appreciating our service members with a discount.

No problem!! PM me for the discount code.

 

[KB Voodoo]

I’m really interested in this rack, but I want to make sure I’m understanding.

Which tonneau cover does it fit without issue?

I currently have only the factory rhino liner/whatever it is without a cover but considering the lack of inside space a cover is necessary for me

Our #1 choice is the BAK Revolver X4S. The rack will bolt directly to it's built in tracks, and you can roll it all the way up.

We make a special version of the VRS just for that cover: https://www.kbvoodoo.com/vrs-overlanding-racks-jeep#gladiator-aluminum-bak

 

[bqueso]

Our #1 choice is the BAK Revolver X4S. The rack will bolt directly to it's built in tracks, and you can roll it all the way up.

We make a special version of the VRS just for that cover: https://www.kbvoodoo.com/vrs-overlanding-racks-jeep#gladiator-aluminum-bak

I just ordered the x4s. I don’t have the tracks but it read as if it didn’t matter So we will see. Once I figure that out, I’ll be back ?

thanks for the reply

 

[zuki_dan]

I just ordered the x4s. I don’t have the tracks but it read as if it didn’t matter So we will see. Once I figure that out, I’ll be back ?

thanks for the reply

The Bak x4s has built in t-bolt tracks on both bedside rails.

 

[bqueso]

The Bak x4s has built in t-bolt tracks on both bedside rails.

are you saying it’s only compatible with the oem rack system?

 

[zuki_dan]

are you saying it’s only compatible with the oem rack system?

If your talking about the trail rails from Jeep. No the tonneau doesn't even mount to those.

The X4S has slots in the aluminum extrusion on each tonneau bed rail side.

 

[bqueso]

If your talking about the trail rails from Jeep. No the tonneau doesn't even mount to those.

The X4S has slots in the aluminum extrusion on each tonneau bed rail side.

perfect, I don’t have the rail system ?

thank you

 

[KB Voodoo]

perfect, I don’t have the rail system ?

thank you

The trail Rail is not required, our rack will bolt directly to the built-in tracks on top of the cover.

 

[SonOfaFish]

Great info, love the look. Have you fitment tested any retractable tonneaus such as Pace Edwards, Roll n Lock? These look to have a partial Tslot, not full length

Sponsored