mx5red
Well-Known Member
- Thread starter
- #1
So, I just had my second brake caliper adapter bolt remove itself!
First time was in April on Passenger Rear Lower bolt, which almost stranded me on the highway by jamming the caliper into the wheel and crumpling the parking brake/brake shield. Write up about those shenanigans here and here.
I checked/tightened other bolts at that time, and havenāt thought about it since. Yesterday, heard a grinding noise in a parking lot and got out to investigate, only to see a missing Top bolt on my Driver side now.
As I posted before, there is a TSB out for this to replace with 06513551AA M12x1.5x33 bolt, though googling says it is a 30mm bolt just like the originals I have. I only have 33 mm of depth so a 35 mm bolt will not work without careful use of washers.
I did not before but I replaced the bolts with heavy coatings of blue loc-tite on them. Suggest everyone do this!!
First time was in April on Passenger Rear Lower bolt, which almost stranded me on the highway by jamming the caliper into the wheel and crumpling the parking brake/brake shield. Write up about those shenanigans here and here.
I checked/tightened other bolts at that time, and havenāt thought about it since. Yesterday, heard a grinding noise in a parking lot and got out to investigate, only to see a missing Top bolt on my Driver side now.
As I posted before, there is a TSB out for this to replace with 06513551AA M12x1.5x33 bolt, though googling says it is a 30mm bolt just like the originals I have. I only have 33 mm of depth so a 35 mm bolt will not work without careful use of washers.
I did not before but I replaced the bolts with heavy coatings of blue loc-tite on them. Suggest everyone do this!!
Sponsored