What wheels are you putting on you JT?

[Tourenwagen]

I have these going on early next week

Sponsored

 

[Sandbox20]

XD 132 RG2 with custom OMF simulated beadlock rings with 315x70x17 Cooper SST Pros.

 

[Blknblu]

These with 35's if my JT ever gets built.

Bruce

 

[Tortoise788]

Thinking about getting these. Everybody thing the offset will work? Im not super familiar with aftermarket wheels. For now i will be using the stock tires.

 

[graydiator]

37x12.5-17 Ridge Grapplers on +25 AEV Servage II that uses a half a bottle of armor all per wash.

 

[Walldo]

37x12.5-17 Ridge Grapplers on +25 AEV Servage II that uses a half a bottle of armor all per wash.

Try 303 Protectant, works bunches better than ArmorAll. JMO
Always liked AEV wheels.
https://www.amazon.com/303-30313-CSR-Protectant-Plastic-Fiberglass/dp/B00KN0UOEE

 

[takeitsleazy]

I have these going on early next week

what model are these? I was pretty set on the XD137s, but these could look really clean with my Gobi

 

[Tourenwagen]

what model are these? I was pretty set on the XD137s, but these could look really clean with my Gobi

There are the new KMC KM235 Grenade Crawlers. They come in black too.

 

[DFWJEEP]

Vision Nemesis 17X9 -12 Offset with 315x70R17 Mickey Thompson Baja ATZ P3

 

[Cyder]

Anyone have any pics of a black gladiator with the light gray fifteen 52 analog HD wheels? They are out of stock on the black and would love to see if the gray goes well with black.

 

[bcunning82]

Vision Nemesis 17X9 -12 Offset with 315x70R17 Mickey Thompson Baja ATZ P3

I am looking at the same wheels with the Nitto Ridge Grapplers 35x12.5R17. I have run a few calculators that say tires will stick out 2.8” further than stock. Nearly 3” on each side seems like a lot. How far out past the fenders are they? I am also looking at the MC game changer lift that requires 4.5” backspacing, so sticking out may be inevitable. Do you have some pictures with the tires straight, looking down the side of the truck? Or directly head on from the front and/or back?

 

[DFWJEEP]

I am looking at the same wheels with the Nitto Ridge Grapplers 35x12.5R17. I have run a few calculators that say tires will stick out 2.8” further than stock. Nearly 3” on each side seems like a lot. How far out past the fenders are they? I am also looking at the MC game changer lift that requires 4.5” backspacing, so sticking out may be inevitable. Do you have some pictures with the tires straight, looking down the side of the truck? Or directly head on from the front and/or back?

The front looks to be close to 3 inches, but the rear fenders must stick out more as they look more like 2.5 inches. I see if I can get some pictures. I will say it driver better with the wider stance.

 

[DFWJEEP]

I am looking at the same wheels with the Nitto Ridge Grapplers 35x12.5R17. I have run a few calculators that say tires will stick out 2.8” further than stock. Nearly 3” on each side seems like a lot. How far out past the fenders are they? I am also looking at the MC game changer lift that requires 4.5” backspacing, so sticking out may be inevitable. Do you have some pictures with the tires straight, looking down the side of the truck? Or directly head on from the front and/or back?

Here are a couple of pics.

 

[Tourenwagen]

I have these going on early next week

 

[bcunning82]

Here are a couple of pics.

Thanks!, That looks pretty good!

Sponsored