What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Orange01z28]

Installed Teraflex sway bar disconnects last night. Brackets and and links went together very easily, and the sway bar disconnects and flips up really easily. Reconnect may not be so quick though, it takes putting your back into it since the brackets on the axle don't line up perfectly.

Everything feels good and stock when reconnected, the only problem is the upper bracket to hold the sway bar when disconnected hits the plastic inner fender liner. That's going to go away soon when I get fenders but I might clearance it a little anyway

Sponsored

 

[m3lover1]

Helped my uncle install Road Armor fenders and inner fender liners this weekend.

 

[Gren71]

Had to cut out room for the outlets. I didn’t use the mounting screws because I didn’t need to right now. I left enough material on theback side that the retainer rings sandwich the bed And the panel. If I ever get it bed lined I will likely drill for self tapping screws.

Thanks!

Ill keep looking for options. I don’t really want to cut into the bed like that :-/

 

[Kevin_D]

what’s the model number of these speakers? And no mods needed? They are a direct fit? Sorry if this is an old topic, I tried to find it in the forums but couldn’t.

Check out this thread:

https://www.jeepgladiatorforum.com/forum/threads/speaker-swap.39223/

Lots of speaker information.

Kevin

 

[johnparjr]

The premium Alpine Audio System uses 9 upgraded Alpine speakers and a sub. And a 552 watt, 12 channel amp, requiring the 220 amp alternator.

The speakers are all the same the rest is correct though as I have the premium sound and have replaced the speakers and 2 different Jeeps and the speakers are the same

 

[Jackdforme]

Got my Sunrider delivered today. I was going to do it but the temp dropped to 30. Anyone know if the Sunrider can be installed in the cold?

 

[TexasTJ]

Thanks!

Ill keep looking for options. I don’t really want to cut into the bed like that :-/

That's fair. I didn't either ,but I figured since it's purpose was for the Mopar inverter I could just cut to fit mine, not like anything else is going to go there. Depending on what/how many connectors you need/want, you could just drill them into the blank cover. That's easy to get a replacement if you ever want to remove it.

 

[DocMike]

More light. Opted for something low and bright for night trail use.

 

[Nebulocity]

Got my Sunrider delivered today. I was going to do it but the temp dropped to 30. Anyone know if the Sunrider can be installed in the cold?

Should be no reason you can't install in the cold. Nothing chemical related such as adhesive tape or the like. All mechanical bolt-on. Although you may be cursing those z-hooks with your cold hands.

 

[Dmehrl]

No more saggy ass! Just finished my install of the IRO 2” lift. Damn she is night and day different from the 1.5” TerraFlex level kit.

 

[Dmehrl]

No more saggy ass! Just finished my install of the IRO 2” lift. Damn she is night and day different from the 1.5” TerraFlex level kit.

 

[Dmehrl]

Did you leave the 1-1/2 level on or remove it before 2” lift

 

[Angler3]

Should be no reason you can't install in the cold. Nothing chemical related such as adhesive tape or the like. All mechanical bolt-on. Although you may be cursing those z-hooks with your cold hands.

I had a hard time in the cold. when the warmer weather and sun came around it was a lot easier

 

[Deleted member 24880]

Did you leave the 1-1/2 level on or remove it before 2” lift

I took them out. IRO did not recommend stacking spacers. I’m good with the 2” lift.

 

[Rubi_Rhod]

Hows the pre filter working for you? Have you checked the air filter since installing the snorkel?

I just cleaned it out last week. This was maybe 30 or so miles of gravel roads driven since.
Whats captured is very fine and gritty. So I think this definitely does a good bit vs a sponge or mesh cover.

Sponsored