What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Gren71]

I got it from an Amazon return pallet seller. Brand spanking new for $25

Where does one find a return pallet seller?

Sponsored

 

[Gren71]

In the last two weeks I have installed:

-Mopar 2" lift
-Steersmarts adjustable rear trackbar
-Steersmarts Sector Shaft Brace
-Rancho geometry correction brackets
-37x13.5/17 Nitto Ridge Grapplers
-Wire harness to turn off license plate lights while in reverse
-Mopar AUX switches
-KC cowl lights
-Amazon Mopar steel bumper
-programmed everything with Jscan

Only things I didn't do myself was the tire install and alignment.


I'm too tired to take photos.

Photos or it never happened!

Only a rear track bar?

 

[rm1515]

Photos or it never happened!

Only a rear track bar?

I will get some.

Installed the front last summer...

 

[mx5red]

-Wire harness to turn off license plate lights while in reverse

What’s this?

 

[rm1515]

What’s this?

Got it on Ebay. Someone in another thread posted it. Make sure to tell them if you have the rear sensors if you order it.

 

[akamax_power]

Finished installing the Rock Slide Engineering step sliders with skid plates. Although the Gen 3 wiring harness was supposed to be way easier to install, I still managed to screw it up and basically ran the wiring harness twice. The hardest part was removing the body bolts, it took a lot of patience and then having to grind down some of the threads so the braces could fit between the washer and bolt head.

 

[XraytecH]

Finished installing the Rock Slide Engineering step sliders with skid plates. Although the Gen 3 wiring harness was supposed to be way easier to install, I still managed to screw it up and basically ran the wiring harness twice. The hardest part was removing the body bolts, it took a lot of patience and then having to grind down some of the threads so the braces could fit between the washer and bolt head.

Same here, body bolts were a PIA.

 

[ArmyMP]

Where does one find a return pallet seller?

Flea markets, Facebook, offerup.

Basically amazon just pallets returns and sells them in bulk. People buy them break the pallets down and sell them.

 

[ArmyMP]

Finished installing the Rock Slide Engineering step sliders with skid plates. Although the Gen 3 wiring harness was supposed to be way easier to install, I still managed to screw it up and basically ran the wiring harness twice. The hardest part was removing the body bolts, it took a lot of patience and then having to grind down some of the threads so the braces could fit between the washer and bolt head.

Wish I could afford a set of those.

 

[XJADDICTION]

Still waiting on a bunch of stuff but put a James Baroud XXL RTT on the rack. I will need to lower the rack a little and add some center support ? maybe. Taking it back off today and putting in the garage for winter.

 

[Sespe]

What brackets did you use? Seems like there's no hardware out there for a 20" lightbar mounted behind the plastic bumper!

Did you mount it to the existing holes where the closeout panel was?

I couldn't find brackets either. I used flat steel bar stock bent in an L shape. I cut holes in the closeout panel and used the existing holes.

 

[Jeepin' John]

Yeah the pull out method isn’t the strongest approach ???

My favorite mod ever is STILL my vasectomy

 

[Tuggernuts]

3
That's the max kids now... it's time to try some butt stuff.

I was always told that’s how you get a daughter. My wife’s not into it and I have two sons. ?‍

 

[19Comanche86]

Rolling around half naked today lol

 

[XJFanatic]

My favorite mod ever is STILL my vasectomy

On my mod list for sure, need to get it done while the army will pay for it ?

Sponsored