What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Lunentucker]

I just looked it up as well but it doesn't have any settings for switching any of the lights to LEDs. I would just stay with JSCAN as a cheaper alternative to TAZER if you ever intend to add LEDs to a non-LED jeep.

Lots of lighting and LED items in the menus on the app. I didn't go into any of them because I wasn't changing anything but tire sizes and TPMS ??‍

Sponsored

 

[Klicht87]

Lots of lighting and LED items in the menus on the app. I didn't go into any of them because I wasn't changing anything but tire sizes and TPMS ??‍

I see. I just checked out their website and I saw it only mentioned a few things. That's good! It seems like a good interface.

 

[Labswine]

Why is anyone with a TAZR or other converter system changing the progamming settings to LED lights from the factory settings for halogens?

I installed LED headlights, LED bulbs in the fogs, and in the backup light sockets with ZERO issues from any of them, WITHOUT using a 'reprogrammer'.

Just curious ???

 

[DailyMoparGuy]

Why is anyone with a TAZR or other converter system changing the progamming settings to LED lights from the factory settings for halogens?

I installed LED headlights, LED bulbs in the fogs, and in the backup light sockets with ZERO issues from any of them, WITHOUT using a 'reprogrammer'.

Just curious ???

I did with the JSCAN. When I first installed my LEDs, they seemed fine without programming. After awhile, I noticed the flickering though. I changed the settings in JSCAN and the flickering stopped. I also changed the setting for my reverse lights when I put LEDs there.

 

[jeepers29]

Got the ECRI in the mail.
I had already downloaded the app and had my single vehicle license already in there (auto-loaded based on phone number) and waiting to be activated. Ridiculously easy to setup and install.

Pulled the panel cover, pulled the two gateway connectors, (the hardest part of the whole thing), Plugged in the bypass module, plugged in the ODB2 module, turned on, fired up the app.
Changed my tire size and changed my TPMS threshold.
Saved and done.

I may tinker with some of the other settings later on, but being in IT for 20 years has taught me to not fix things that ain't broke.

What all do you need to buy? They have multiple items on amazon.

 

[Killroy Was Here]

Jeepers29
Go directly to the ECRI web site.
https://ECRI.app

This is so much less of a pain in the a** to make changes with. Had a Tazer & got rid of it.

No sleep cycles, no wierd patterns to hold/press for the steering wheel buttons, and it will calculate your new tire diameter while you drive.
And nothing to "un-marry" when you take the truck in to the dealer for service.

Major wins in my book.

 

[Lunentucker]

I bought direct from them, but you need the ECRI, the security gateway bypass, and a single vehicle license.

 

[XraytecH]

Jeepers29
Go directly to the ECRI web site.
https://ECRI.app

This is so much less of a pain in the a** to make changes with. Had a Tazer & got rid of it.

No sleep cycles, no wierd patterns to hold/press for the steering wheel buttons, and it will calculate your new tire diameter while you drive.
And nothing to "un-marry" when you take the truck in to the dealer for service.

Major wins in my book.

ECRI is a very good option for recalibrating the speedometer. I really like the GPS Calibration. It does other things but I can't remember. I use a TAZER Mini for the things ECRI does not do.

 

[Labswine]

I did with the JSCAN. When I first installed my LEDs, they seemed fine without programming. After awhile, I noticed the flickering though. I changed the settings in JSCAN and the flickering stopped. I also changed the setting for my reverse lights when I put LEDs there.

Hmmmm...mine have never flickered and, they've been on my Gladiator for almost three years now (got it July '19, put them on in September of '19).

 

[PDelena]

Finally got and installed my right and left bumper appliques. Also got the Hooke Road Dead Pedal. Didn't even have to take a long lunch to install everything. Took all of about 15 minutes. Sweet! Links can be found on my build link.

 

[molevich]

Finished installing my accessory battery. Renogy 50a charge controller paired with 100a renogy battery.

 

[MrB]

Took delivery last Monday at Gupton and immediately drove it home to CO and have added a few minor things so far:

• Vaultek Lifepod safe. I bought this to fly with, but I’ll keep it in my Jeep otherwise.
• Short antenna
• Sunrider Flip Top
• Rugged Ridge door sill guards
• Weathertech FloorLiner HP (Front and rear)
• Rokblokz Front Only XL Long
• Dog hammock
• Organizers for the gear shift and console
• Flag decal
• Aluminum knob covers (arriving tomorrow)

Rocky Mountain Arsenal:

 

[dos0711]

Ordered a Warn winch plate and a Warn EVO 12s

 

[ShadowsPapa]

I did with the JSCAN. When I first installed my LEDs, they seemed fine without programming. After awhile, I noticed the flickering though. I changed the settings in JSCAN and the flickering stopped. I also changed the setting for my reverse lights when I put LEDs there.

There's instructions from jscan telling what to do to get rid of flickering. Seems enough see it that it's an issue and they suggest a pair of settings to get rid of it.

 

[Azriel62]

2021 Sarge Green Rubicon with Nitto Ridge Grapplers (35x12.5x17) no lift and extreme Recon fender flare extensions

What mud flaps did you use? Any problem with the rear exhaust side?

Sponsored