1.5” TF level, 315/70/17 on factory wheels

[sizmtrz]

No poke, perfectly at the ww, no rub lock to lock.

Sponsored

 

[MyJeepShawn]

What pressure you running in them?

 

[sizmtrz]

What pressure you running in them?

Per the hu display, 38 psi

 

[kilroy173]

Looks good. I like the steelies.

 

[sizmtrz]

Looks good. I like the steelies.

Thanks, picked them up for a song. Plan is to plasti dip them white and try and source some hubcaps.

 

[NachoRuby]

Thanks, picked them up for a song. Plan is to plasti dip them white and try and source some hubcaps.

I know you're not asking for opinions, but naked steelies FTW. No hubcaps. It looks great.

 

[sizmtrz]

I know you're not asking for opinions, but naked steelies FTW. No hubcaps. It looks great.

Thanks. We’ll see lol. White for sure, hubcaps are an option. Lol

 

[Ohio JKU]

Funny....I was just measuring tonight...
1.5" terra flex level kit front and 3/4" daystar rear (keeps 3/4" rake) and now 255/80r17 on factory rims, no poke... (cooper discoverer, st maxx)

Front is up 2" and back is 1-1/4" , exactly the measurements expected.
12" clearance at the cross member
14" to bottom of frame (behind front fender at drivers door)

 

[Ohio JKU]

I like the Steelies too, but I'd like to see you pull off the retro hubs too!

 

[elPollero]

What tire is that? What load rating also if you don’t mind. Wondering about approx. weight.

 

[kilroy173]

Funny....I was just measuring tonight...
1.5" terra flex level kit front and 3/4" daystar rear (keeps 3/4" rake) and now 255/80r17 on factory rims, no poke... (cooper discoverer, st maxx)

Front is up 2" and back is 1-1/4" , exactly the measurements expected.
12" clearance at the cross member
14" to bottom of frame (behind front fender at drivers door)

What do those measure out at now that they're mounted and on the truck?

 

[Ohio JKU]

At 39 psi, looks like 31-1/2" full squish

 

[sizmtrz]

What tire is that? What load rating also if you don’t mind. Wondering about approx. weight.

 

[sizmtrz]

What tire is that? What load rating also if you don’t mind. Wondering about approx. weight.

Stock= 60.2
Steelies / 315 70 17 cooper at 92.4

dont mind the mid plastidip removal. Lol. First attempt unsuccessful.

 

[elPollero]

How’s it handle now. Assuming yours is a 3.6 gas burner with 3.73 gears , does it fill sluggish at all .

Sponsored