Sponsored
2020 Gladiator front end leveling with Rusty's 2" leveling kit ?
ChrisNLA
Well-Known Member
Is it the one with just front and rear spacers?
I used a Teraflex leveling kit and it came with bump stop extensions as well. I didn't see any in the Rusty's kit. I'd be concerned that the springs might fully collapse and the coils contact each other before the bump stops hit.
I used a Teraflex leveling kit and it came with bump stop extensions as well. I didn't see any in the Rusty's kit. I'd be concerned that the springs might fully collapse and the coils contact each other before the bump stops hit.
Gvsukids
Well-Known Member
- First Name
- Justin
- Joined
- Mar 7, 2020
- Threads
- 26
- Messages
- 7,269
- Reaction score
- 6,902
- Location
- Grand Rapids
- Website
- www.youtube.com
- Vehicle(s)
- 2020 Gladiator Sport S Max Tow
- Occupation
- Delivery Driver
How can I tell if this happens?
James H
Well-Known Member
You can flex it and take a look to see if the springs are fully collapsed. An easy, inexpensive option would be to order the stackable bump stops that Metalcloak makes and install 1 or 2 pucks if needed.
Sponsored
ChrisNLA
Well-Known Member
I am just using the Teraflex 1.5" leveling kit. It included two 1" spacers, two .5" spacers, and some bump stop extenders that go on the axle side.
ChrisNLA
Well-Known Member
Yea what that fella said below
I'm not sure if that would or wouldn't be a problem on the Rusty's kit - I just know that Teraflex includes extensions on their shorter kit - so it may be a worthwhile concern to check.
Camaroboi13
Well-Known Member
You probably want to look at shock extensions and sway bar end links as well. To be honest, you can probably get away with something like the RC spacer kit that includes everything you need to get the front up in the air. There are cheaper options, there are more expensive alternatives, at the end of they day they’re all just spacers. Don’t think too hard about it.
