Alu-Cab Contour Canopy Roll Call - not Camper

[BSchanze]

Maybe this is on this thread somewhere, but I cannot seem to find it. Can someone please show the positive pressure vent for this canopy. Is it on the upper part of the front wall? I think I have seen it in some pictures, but not all so not sure. Still doing my research and toppers and wanting to figure out some things.

not much to look at but it's there and it helps

Sponsored

 

[intentsrig]

Anyone in the northern CA ish region thinking of selling theirs?

 

[intentsrig]

Question for you guys. I was looking at the instructions and wanted to make sure I am seeing them right.

The two bolts that clamp from the cargo bed rail to the Alu cab hardware x12 total, are M8x30? or M8x20?

I have the built right bed rails and have hardware nut plates that slides in place of the alucab designed nut plate pieces. They are M8 threads. It was talked about by a few people in this thread awhile back.

 

[Batlou]

not much to look at but it's there and it helps

That ceiling mounted Molle Panel is awesome! What can you tell me about it and how can I get one?

 

[BSchanze]

Question for you guys. I was looking at the instructions and wanted to make sure I am seeing them right.

The two bolts that clamp from the cargo bed rail to the Alu cab hardware x12 total, are M8x30? or M8x20?

I have the built right bed rails and have hardware nut plates that slides in place of the alucab designed nut plate pieces. They are M8 threads. It was talked about by a few people in this thread awhile back.

M8x20 go to the rails. M8x30 should go bracket to bracket to account for shims

https://www.alu-cab.com/wp-content/...-suit-Jeep-Gladiator-Fitment-Instructions.pdf

 

[BSchanze]

That ceiling mounted Molle Panel is awesome! What can you tell me about it and how can I get one?

@Batlou - thank you! I think they add a lot of mounting options to the roof. Unfortunately, I custom made them - and spent more than I'd like to admit to do it (mostly my stubbornness to powder coat them OD Green)

 

[ttn333]

Question for you guys. I was looking at the instructions and wanted to make sure I am seeing them right.

The two bolts that clamp from the cargo bed rail to the Alu cab hardware x12 total, are M8x30? or M8x20?

I have the built right bed rails and have hardware nut plates that slides in place of the alucab designed nut plate pieces. They are M8 threads. It was talked about by a few people in this thread awhile back.

You have a pm.

 

[AKID_RBM]

Any chance you can get one of these in White? Looked at post 13, there seems to be more recent entries to this space.. Venturous Ozark, Nogi Ridgeback, etc. Is Alu-Cab still the standard to bounce others off of?

 

[Toten Unterhosen]

Maybe this is on this thread somewhere, but I cannot seem to find it. Can someone please show the positive pressure vent for this canopy. Is it on the upper part of the front wall? I think I have seen it in some pictures, but not all so not sure. Still doing my research and toppers and wanting to figure out some things.

A bit late to the party, but if you want or need to see the external portion of the vent you can find those earlier in this same thread (#217).

As an owner of the original version of the canopy, I was interested to see the positive pressure vent that was added as I was working through solutions to add one to mine.

Sponsored